User Manual

WPB3000 Powerline Wireless Network Extender User Manual
35
You can set the passwords of remote PLC devices according to their MAC
addresses and DEKs (Device Equipment Key).
The following table describes parameters in this page:
Field Description
Device Name Enter the device names of the remote devices.
Remote MAC Enter the MAC addresses of the remote devices.
Password (DEK)
When you set the parameters of the remote devices, you
need to enter this password for authentication.
Remote
NetworkPwd
Set the network passwords for the remote PLC devices.
 Note:
You can set up to 8 network passwords for the remote PLC devices.
You can access the Internet by network password synchronization. But network
passwords of the two devices for password synchronization must be the same,
and either of the PLC devices must be connected to the Internet.
After setting the parameters, click Apply to save the settings.
5.4.3 Logout
Choose ADVANCED > Logout to log out of the Web configuration page.