User Manual

WPB3000 Powerline Wireless Network Extender User Manual
46
6.3 Leaving an AVLN Network
Assume that a network exists. If you want to remove one device, the ‘leaver’ from an
AVLN network, or remove the device from the existing network and have it join
another logical network, do as follows:
Step1 Press the Security pushbutton on the ‘leaver’ for more than 10 seconds.
The device will reset and restart with a random NMK.
Step2 Wait for reset to complete.
The Power LED indicator on the ‘leaver’ will momentarily extinguish during reset and
flash during restart, then illuminate steadily. The ‘leaver’ is removed from the
existing network successfully.
Once the process completes, you may disconnect the device from the medium or
join it to another logical network on the same medium.