User Manual

Gpn2.8P61A-C PLC Wireless Router User Manual
48
Appen dix A Troubleshooting
Why all the LED indicators are off?
Check the connection between the power adapter and power socket.
(1) Check the connection between the power adapter and power socket.
(2) Check whether the device is turned on.
Why the LAN1 or LAN2/WAN indicator is off?
(1) Check the connection between your Powerline Wireless Network Extender and
computer, hub, or switch.
(2) Check the running status of your computer, hub, or switch, and verify whether
they run normally or not.
(3) Check the network cable that is connected to the Powerline Wireless Network
Extender and other devices.
Why you fail to access the Web page?
Follow the steps below to check the connection between the computer and the
device:
(1) Click start > Run and enter ping command ping 192.168.10.1 (the IP address of
Powerline Wireless Network Extender).
(2) If you fail to access the Powerline Wireless Network Extender, check the
following settings:
- The network cable type
- The connection between your router and the computer
- TCP/IP settings of PC
How to restore factory defaults after carrying out the incorrect configuration?