User manual

4
VDSL2/GigE Wireless 11n Gateway
WAN Ethernet
When the WAN Ethernet LED glows steadily, the Gateway is connected to an
Ethernet WAN. When it flashes, it signifies that data traffic is traveling across
the connection.
LAN Ethernet
The LAN Ethernet LEDs illuminate when the Gateway is connected to another
device via one of its LAN Ethernet ports. When one of the LAN Ethernet LEDs
flashes, data traffic is passing across the corresponding connection.
HPNA
The HPNA LED illuminates when the Gateway is connected to another device
via its HPNA port. When it flashes, data traffic is passing across the connection.
USB
The USB LED illuminates when a USB device is connected via the Gateway’s
USB port. This port is not currently operational, but may be enabled in a future
firmware update.
Wireless
The Wireless LED illuminates when the Gateway is connected wirelessly, assum-
ing the Gateway’s Wireless feature is turned on.
WPS Button
The WPS button activates WPS (WiFi Protected Setup) on the Gateway. To use
WPS, press the WPS button on the Gateway, then, within two minutes, press the
WPS button on a device you wish to connect to the Gateway’s wireless network.
The device will automatically join the Gateway’s wireless network. Repeat for
other wireless devices.