Owner's Manual

Installing the Adapter Software

Windows 2000

1. After you install the PCI 802.11b Wireless Adapter and turn on your computer,

the “Add New Hardware Wizard” window appears. Click the Next button.

4. To activate the PCI 802.11b Wireless Adapter’s software, you must restart your

computer. Click OK in the “System Settings Change” window to restart. If this

window does not appear, restart your computer manually.

2. The “Actiontec PCI 802.11b Wireless Adapter Properties” window appears.

(Note: The “SSID” must be the same as the “ESSID” on your home gateway or

access point. See the documentation that came with your home gateway or access

point to access its “ESSID” value.) Click OK.

3. The installation is complete. Click Finish.