Owner's Manual

37
&Q6: Asynchronous Mode, buffered. Same as \N0.
&Q7: Reserved.
&Q8: MNP error control mode. If an MNP error control protocol is not estab-
lished, the modem will fallback according to the current user setting in
S36.
&Q9: V.42 or MNP error control mode. If neither error control protocol is estab-
lished, the modem will fallback according to the current user setting in
S36.
Result Codes:
OK n = 0, 5, 6, 8, 9
ERROR Otherwise
&Sn Data Set Ready (DSR) Option
This command selects DSR action.
&S0: DSR always ON (default).
&S1: DSR comes on when establishing a connection and goes off when the con-
nection ends.
Result Codes:
OK n = 0, 1
ERROR Otherwise
&V0 View Active Configuration and Stored Profile
This command is used to display the active profiles.
&V0: View active file
Option Selection AT Cmd
Comm Standard Bell B
CommandCharEcho Enable E
Speaker Volume Medium L
Speaker Control OnUntilCarrier M
Result Codes Enable Q
Dialer Type Tone T/P
ResultCode Form Text V
ExtendResultCode Enabled X
DialTone Detect Enable X
BusyTone Detect Enable X