Installation Guide

Coaxial-to-Ethernet

Conversion Kit

Model # ECB6200

Actiontec logo are registered trademarks or trademarks of Actiontec Electronics, Inc., in the U.S.

or other countries. All other names are properties of their respective owners. Product photo

may dier from actual product. However, functionality remains as stated above. Specications

are subject to change without notice.

MoCA Network Adapter

Note: Circled numerals correspond to installation step numbers.

Quick Start Guide

This Quick Start Guide will walk you through the easy steps

to connect your MoCA Network Adapter. During this

process, we’ll show you how to:

A Install the First Adapter

B Install Additional Adapter(s)

Power

Outlet

Power

Adapter

Coaxial

Outlet

Coaxial Cable

Coaxial Port

of TV/STB

Ethernet

Cable

Ethernet

Power

Coax

Coax In

ECB6200

TV/STB

Out

Coaxial

Cable

Ethernet Port

of Modem/

Router

PN: 0530-0759-000

PAGE 1
TV/STB Out ECB6200 Coax In Coaxial Cable 4 5 Coaxial-to-Ethernet Conversion Kit Ethernet Power Power Coax 1 Coaxial Cable 2 Power Outlet Ethernet Cable MoCA Network Adapter Model # ECB6200 Quick Start Guide 6 Coaxial Port of TV/STB Power Adapter Coaxial Outlet This Quick Start Guide will walk you through the easy steps to connect your MoCA Network Adapter.
PAGE 2
A Install the First Adapter Note: See the figure on the back of this guide for more details. 1 Get one MoCA Network Adapter. Step2 Plug one end of an Ethernet Cable into the Ethernet Step Port on the right side of the Adapter. 7 Step Get the Adapter’s power adapter. Plug the appropriate end of the Power Adapter (External, 5V DC, 2A made by APD, Model #WA-10P05FU) into the Power Port on the right side of the Adapter, and plug the other end into a Power Outlet.