Owner's Manual

56
\Tn Inactivity Timer
This command specifies the length of time (in minutes) that the modem will wait
before disconnecting when no data is sent or received. A setting of zero disables the
timer. Alternatively, this timer may be specified in register S30. This function is only
applicable to buffer mode.
Result Codes:
KO552-0=n
RORREesiwrehtO
\Vn Protocol Result Code
dnammoCtceffE
0V\edoctluserlocotorpelbasiD
1V\edoctluserlocotorpelbanE
2V\edoctluserlocotorpelbanE
Result Codes:
KO2,1,0=n
RORREesiwrehtO
\Xn XON/XOFF Pass Through
dnammoCtceffE
0X\
sretcarahclortnocwolfFFOX/NOXsessecorpmedoM
)tluafed(yllacol
1X\
lortnocwolfFFOX/NOXssapdnasessecorpmedoM
sretcarahc
Result Codes:
KO1,0=n
RORREesiwrehtO