Installation Guide Instruction Manual

ManualsBrandsActiontec ManualsWireless HeadsetsMWTV200R

MyWirelessTV allows you to place an HDTV anywhere in your

home because it transmits your video and audio wirelessly.

Use this Receiver to connect an additional HDTV to your existing

MyWirelessTV HD Transmitter.

Congratulations! You have successfully paired the new Receiver

to the existing Transmitter.

How MyWirelessTV Works

Step

2 Plug the smaller end of the

power supply into the 5VDC port on

the back of the Receiver.

Step

3 Plug the larger end of the

power supply into a power outlet.

Step

1 Get the power supply and

Receiver from the box and place them

near the existing MyWirelessTV HD

Transmitter.

Pair New Receiver to Existing Transmitter

Step

2d Turn on the HDTV near the Receiver. Make sure you

have selected the correct source input on the TV. You should be

able to see video from the source device.

Step

4 Make sure the Power Light

on the Receiver is SOLID Green.

Step

7 Wait 40-45 seconds. The Power Light on the Receiver

should be SOLID Green and the Sync Light on the Receiver

should be Blinking Green.

Step

5 Press the Sync button on the

new Receiver for at least 5 seconds.

Step

6 Now press the Sync button

on the existing Transmitter for at least

5 seconds.

Step

1b Plug the smaller end of the

power supply into the 5VDC port on

the back of the Receiver.

Step

1c Plug the larger end of the

power supply into a power outlet.

Step

1a Unplug the new Receiver

and its power supply. Go to the HDTV

that you want to connect.

Step

1d Make sure the Power Light

on the Receiver is SOLID Green.

Step

1e Wait 30-45 seconds. The

Power and Wireless Lights should be

SOLID Green, and the Sync Light

should be Blinking Green.

Flip this Quick Start Guide over to continue

Note: Only use power adapter, Leader Electronics Inc., Model MU12-G050200-A1

Note: If the Sync Light is SOLID Orange, wait another 10-15 seconds. It should turn

GREEN. If the Sync Light stays SOLID Orange you will need to manually pair the units

again. If the Sync Light is Blinking Red the units can’t connect or are out-of-range.

RECEIVER MWTV200R

(Optional)

HDTV

POWER

OUTLET

Please refer to

this illustration

while connecting

cables

Step

2a Get the HDMI cable from

MyWirelessTV Kit.

Step

2b Plug one end of this HDMI

cable into an HDMI port on the HDTV.

Step

Plug the other end of the HDMI

cable into the HDMI Out to TV port on

the back of the Receiver. The HDTV

should now be connected to the Receiver.

CAUTION

Do NOT place the MyWirelessTV

Receiver on top of or near a

heat-generating source.

Connect the Cables

MWTVrx_QS3_QS sngl pnl 9/13/11 4:40 PM Page 1

Summary of content (2 pages)

PAGE 1
MWTVrx_QS3_QS sngl pnl 9/13/11 4:40 PM Page 1 A How MyWirelessTV Works MyWirelessTV allows you to place an HDTV anywhere in your home because it transmits your video and audio wirelessly. B Pair New Receiver to Existing Transmitter Step Step 1 Get the power supply and Receiver from the box and place them near the existing MyWirelessTV HD Transmitter. Step 2 Plug the smaller end of the power supply into the 5VDC port on the back of the Receiver. new Receiver for at least 5 seconds.
PAGE 2
MWTVrx_QS3_QS sngl pnl 9/13/11 4:40 PM Page 2 D E Setting Up IR Control (Optional) The IR Blaster and IR Receiver work together to let you control the source device (the device to which you connected the Transmitter: DVR, Blu-ray Player, etc.) from the Receiver location, whether it's in the next room, or on the other side of the house.