User`s guide

SR300
USER’S GUIDE
48
48
I could NEVER log onto the Range Extender Wirelessly.
a. Check that your Wi-Fi adapter supports WPA2 Wi-Fi security. If it does not then you will need to change
the Wi-Fi security on the Range Extender. Go to the Web Menu, select Wi-Fi Settings and then Wi-Fi
Security. Select the Extended Network from the drop down menu and either disable security or
downgrade the security to WEP. Try connecting again.
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the
Range Extender. Access http://setup.ampedwireless.com and run through the Wizard again. After you
have successfully reset the Home Network connection, try connecting wirelessly again.
c. If you have previously connected to the Range Extender or a device with the same network
name (SSID), the password might be saved in your devices Wi-Fi profile. Delete the Wi-Fi
profile and try again. (Refer to your device Manufacturers guide on how to delete the Wi-Fi
profile.)
I can no longer access the Web Menu or the Range Extender no longer responds.
a. Connect to your Range Extender and try to access http://setup.ampedwireless.com using your web
browser.
b. If you are advanced in networking troubleshooting, log onto your home router’s web interface. Look
for the DHCP client list and try to find the IP address of your Range Extender assigned by your home