Owner manual

ManualsBrandsActiontec ManualsWireless HeadsetsSBT100U

Wireless

Display Kit

Model # SBWD100A & Model # SBT100U

Installation Guide

This Installation Guide will walk you through the easy steps

to set up your ScreenBeam Wireless Display Receiver and

USB Transmitter. During this process, we’ll show you how to:

Install the Receiver

Install the Software

and USB Transmitter

Pair the Receiver and

USB Transmitter

registered trademarks or trademarks of Actiontec Electronics, Inc., in the U.S. or

other countries. All other names are properties of their respective owners.

ScreenBeam

Step

3 A new screen appears.

Select the Receiver, then

click Connect.

Step

4 A PIN appears on your

HDTV screen.

Step

5 Enter the PIN in the

ScreenBeam screen on the

laptop/PC within 60 seconds, then

click Next.

The ScreenBeam Transmitter and

Receiver are now paired.

You should see the screen of the

laptop/PC on the HDTV.

Go to www.actiontec.com/screenbeam to register your

product and for more information, including:

• Videos • FAQs • User Manual • Wall Mount Templates

For Miracast or Intel WiDi Devices

• Miracast: To obtain an updated list of compatible Miracast

devices and setup instructions, go to:

http://www.actiontec.com/wirelessdisplay

• WiDi: Make sure the WiDi system can support the required

WiDi software (3.5 or higher). To obtain the latest WiDi soft-

ware and drivers, go to:

http://www.intel.com/go/wirelessdisplayupdate

IMPORTANT: Federal Communication Commission (FCC) Radiation

Exposure Statement:

This EUT is compliance with SAR for general population/uncontrolled exposure

limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the

measurement methods and procedures speci ed in OET Bulletin 65 Supplement

C. This equipment should be installed and operated with minimum distance

1.5 cm between the radiator and your body.

Frequently Asked Questions

Do I need to install ScreenBeam software or the USB

Transmitter included with the ScreenBeam Kit to connect to a

Miracast or Intel WiDi device?

No. For Miracast devices, refer to the user guide of the device’s

manufacturer. For WiDi-capable systems, make sure your system

driver and WiDi software are up-to-date.

My video quality is poor, or I’m seeing a mosaic display on my

HDTV. What should I do?

First, make sure the laptop/PC meets the recommended system

requirements. If you’re seeing a constant mosaic picture,

disconnect, then reconnect the ScreenBeam connection. Also,

make sure the Wireless Display Receiver is not hidden inside a

cabinet, as this can reduce performance.

ScreenBeam displays a screen that seems to be larger than my

TV can handle. How can I ﬁ x this?

Hover over the ScreenBeam icon in Windows system tray at

the bottom right of the desktop. A menu will appear. From the

menu, select Preferences, then adjust the screen size.

How can I update my Wireless Display Receiver ﬁ rmware?

Go to http://www.actiontec.com/screenbeam to download

the latest  rmware and refer to the upgrade instructions

posted online.

I’ve inserted the software CD into the CD-ROM drive, but it

doesn’t install. What should I do?

In Windows Explorer, browse to the CD-ROM drive (e.g., D:), then

locate and double-click on the “Setup.exe”  le.

Should I be concerned if Windows’ ﬁ rewall or anti-virus

software warns that ScreenBeam is trying to open a port?

ScreenBeam requires Windows to temporarily open a port to

stream content to the TV. Click Allow when the message appears.

How can I update my ScreenBeam Wireless Display software?

Open the ScreenBeam Wireless Display application. Right-click

on the ScreenBeam Receiver you’ve previously connected to and

select “Check for updates…” . Make sure the laptop/PC is

connected to the Internet.

My laptop/PC displays the following message: “Color scheme

has been changed.” Is this a problem?

No. Select “Keep the current color scheme and don’t show this

message again.”

Why am I unable to play a DVD or Blu-ray disc when connected

to ScreenBeam?

Currently, ScreenBeam does not support the streaming of

protected content such as DVD/Blu-ray movies, TV shows, etc.

What should I do if the ScreenBeam Wireless Display software

cannot connect or pair with ScreenBeam Receiver?

Reboot the laptop and power cycle the Wireless Display Receiver.

Also, try selecting a di erent wireless channel before connecting.

To do this, from the “Add a Receiver” screen, click on the wireless

channel drop-down menu, then select a di erent wireless channel.

Part # 0530-0683-001

This product has a 1-year Limited Hardware Warranty and 90-day free software

updates from date of purchase.

Go to http://www.actiontec.com/products/warranty.php for more information.

Summary of content (2 pages)

PAGE 1
3 Step A new screen appears. Select the Receiver, then click Connect. 5 Step Enter the PIN in the ScreenBeam screen on the laptop/PC within 60 seconds, then click Next. The ScreenBeam Transmitter and Receiver are now paired. You should see the screen of the laptop/PC on the HDTV. For Miracast or Intel WiDi Devices 4 A PIN appears on your Step • HDTV screen. • Miracast: To obtain an updated list of compatible Miracast devices and setup instructions, go to: http://www.actiontec.
PAGE 2
Welcome! Congratulations on your purchase of a ScreenBeam Wireless Display Kit. The Wireless Display Kit lets you wirelessly transmit what’s on your Windows 7 or 8 laptop/PC, Miracast™ device, or Intel® WiDi device, and display it on your HDTV. Important Note: If you’re connecting to a device that has built-in Miracast or WiDi (3.5 or higher), you’ll only need to complete Section A of this Quick Start Guide.