Installation guide

ManualsBrandsActionTec ManualsComputer equipmentScreenBeam Pro SBWD100A EDU

Wireless Display

Receiver

are trademarks or registered trademarks of Actiontec Electronics, Inc., in the U.S. or other

countries. All other names are properties of their respective owners.

This product has a 1-year Limited Hardware Warranty and 90-day free software updates from date of purchase.

Local Law

This Limited Warranty Statement gives the customer speciﬁc legal rights. The customer may also have

other rights which vary from state to state in the United States, from province to province in Canada, and

from country to country elsewhere in the world.

To the extent that this Limited Warranty Statement is inconsistent with local law, this Statement shall be

deemed modiﬁed to be consistent with such local law.

Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the

customer.

Go to http://www.actiontec.com/products/warranty.php for more information.

Go to http://www.actiontec.com/support for product

support, updates, and more information including:

• Firmware Updates • Troubleshooting • Registration • FAQs

Part No.: 0530-0741-000

Product Support & Additional Information

Declarations of Conformity (DoC)

To obtain the complete DoC form in softcopy, go to the

Actiontec Electronics Declarations of Conformity EU/EEA website

at http://international.actiontec.com/support/doc

For GNU General Public License (GPL) related information, go to

http://opensource.actiontec.com

The symbol at right is placed in accordance with the European

Union Directive 2002/96 on the Waste Electrical and

Electronic Equipment (the WEEE Directive). If

disposed of within the European Union, this product

should be treated and recycled in

accordance with the laws of your jurisdiction

implementing the WEEE Directive.

Installation Guide

Install the Receiver

Connect Using Intel WiDi App

Connect Using Windows 8.1 or Higher

Connect Using WiFi Miracast-Enabled Device

Device Management

Device Management (continued)

Click the “ Apply” button to conﬁrm new settings. New settings take

eﬀect immediately.

Step

2 Enter the network security key: “12345678”.

Step

4 The Username is “Administrator” and Password is

“Actiontec” by default.

PIN Enforcement

Select “Oﬀ ” to disable the PIN enforcement function. PIN entry

or PBC is required when connecting your device to the receiv-

er for the ﬁrst time.

Select “ On” to enable the PIN enforcement function. In this

case, you must enter a PIN code on the device connecting to

the receiver for the ﬁrst time. When this function is enabled,

the system provides two PIN generation methods: Random

and Static.

Random: A PIN code is generated randomly by the system

and displayed on the connected HDTV/projector.

Static: Users can enter seven (7) digits in the Static box,

then click the “Apply” button, and the system generates an

eight (8) digit PIN and display it on the Static PIN ﬁeld. This

PIN will not be displayed on the connected HDTV/projector.

HDMI Power Management

Select the Features tab, and you can ﬁnd the HDMI Port Power

management feature. There are three states for the HDMI port

when the receiver is idle: Always On, Screensaver, and HDMI

Oﬀ.

Device Management (continued)

Click the “ Apply” button to conﬁrm new settings. New settings take

eﬀect immediately.

Always On: Selecting this option, the HDMI output is turned

on all the time.

Screensaver: Selecting this option, the system will run the

screensaver after the deﬁned Wait time expires. Users can

deﬁne the Wait time (2, 10, or 30 minutes) in the Wait box.

HDMI Oﬀ: Selecting this option, the HDMI output will be turn

oﬀ after the deﬁned Wait time expires. Users can deﬁne the

Wait time (2, 10, or 30 minutes) in the Wait box.

Firmware Upgrade

Select the Firmware Upgrade tab to display ﬁrmware upgrade

features. Download the latest ﬁrmware from “https://upgrade.

actiontec.com” before upgrading the receiver.

Device Management (continued)

Follow the steps below to upgrade the receiver,

Step

Select “ Enable” in the Firmware Update dropdown box.

Step

Click the “Browse” button beside the Firmware Package

box and select the ﬁrmware (install.img) you have downloaded.

Step

3 Click the “Apply” button to upload the ﬁrmware ﬁle to

the receiver. This process may take several minutes.

Step

After the ﬁle is uploaded successfully, the receiver will

start ﬁrmware upgrade automatically.

Select the Features tab, and

you can ﬁnd the Force PIN

Pairing on First Connection

feature.

This Installation Guide will walk you through the easy steps

to set up your ScreenBeam Pro - Education Edition Wireless

Display Receiver. During this process, we’ll show you how

to:

Model#: SBWD100A EDU

Note: The username and password are case sensitive.

Access the URL address (“http://192.168.51.1“ in this

example) that is displayed on the Ready To Connect screen with

a web browser on the laptop.

Summary of content (2 pages)

PAGE 1
C Device Management (continued) Step 2 Enter the network security key: “12345678”. C Device Management (continued) PIN Enforcement Select the Features tab, and you can ﬁnd the Force PIN Pairing on First Connection feature. 3 Step Access the URL address (“http://192.168.51.1“ in this example) that is displayed on the Ready To Connect screen with a web browser on the laptop. 4 Step The Username is “Administrator” and Password is “Actiontec” by default.
PAGE 2
Welcome! Thank you for your purchase of the ScreenBeam Pro - Education Edition Wireless Display Receiver. Once connected to your compatible mobile device, you’ll be able to project your device’s screen wirelessly, to a selected HDTV monitor or projector. When Steps 1, 2, and 3 are complete, the hardware should be connected as shown in the ﬁgure below. B1 Connect Using Intel WiDi App Note: If your device’s OS is Windows 8.1 or higher, proceed to section B2 (“Connect Using Windows 8.