User manual

12
Actiontec USB/Ethernet DSL Modem User Manual
13
Chapter 3 Performing a Quick Setup
5. In the next screen, select the type of connection provided by the ISP by click-
ing in the radio button next to “PPPoA” or “PPPoE.” If unsure about the selec-
tion, check the information provided by the ISP.
6. Enter the user name and password provided by the ISP in the appropriate text
boxes, then click in the radio button next to “Dynamic IP-DHCP.”
Click Apply.
☞
Note: If setting up the Modem with a single static IP address or
a block of static IP addresses, see chapter 4, “Setting up Static IP
Addresses,” on page 15 to configure the Modem.