User`s manual
_
---
_.-_---
_--
.
---
--..-
-
1. Locate a COM (serial) port on the back of your PC. Most COM ports use 9-pin male connectors.
Note:
If all of your PC’s COM ports are already used by a mouse and
I
or a modem, you must
disconnect the modem
or
the mouse (both
physical
device and the corresponding
software
COM
port
connection)
to
vacate
one COM port, or install an add-in board with additional
COM ports.
2. insert the 9-pin
ACT-IR200L/IRZZOL
connector in the Q-pin COM port, as shown in the following diagram.
If your PC has a 25-pin connector, you must use a 9-pin-to-25-pin converter,
as shown
in the following
diagrak.
k.
._
r-
-
.
+..
b,
I_-
_
:-
.
_.-
t-
..
-
-
_
,.I.