Security Camera - High Speed Dome Camera User Manual

♦ DETECT MODE

Four alarm detect modes are provided for different application.

INT. FOCUS

The alarm will be triggered if the internal focus changes; and if the focus

returns to the original position, the alarm will stop.

FIX FOCUS

If focus movement is detected, the alarm will be triggered, and the alarm

stops when focus returns to the original position. Of the detected focus

movement keeps changing for more than four seconds, the new focus

position will be memorized as the reference and the alarm will stop.

INT. AE

When Auto Exposure (AE) movement is detected, the alarm will be triggered;

and if the Exposure Level returns to the original level, the alarm will stop.

FIX. AE

The alarm will be triggered if the Exposure value changes; if the adjusted AE

value retains for four seconds, the value will be saved as the reference and

the alarm will stops.

♦ EXIT

Exit this page.

B-3-19 WDR SETTING (23x MODEL Only)

The Wide Dynamic Range function is especially effective in solving indoor and

outdoor contrast issues to enhance better image quality and video performance. It

enables the speed dome to catch detailed data from the dark part (Indoor) without

any saturation from the bright part (Outdoor). The parameter of WDR function

can be set on this page.

NOTE: The INT. FOCUS and FIX FOCUS detect modes will

be activated only with Auto Focus mode.

NOTE: The Backlight function will automatically turned off

when the WDR function is enabled, because the WDR

function has better effect than the Backlight compensation.