USER 'S MANUAL Up to 16 Channels / FM Radio / Chinese/English Language / CTCSS，DCS Time-out timer(TOT) / High/Low Power are optional / Battery saving function VOX / Busy Channel Lockout (BCL) / Low Battery Voltage Warning Carrier mode to scan / Channel information broadcast Frequency Hopping Techniques / Programmable by PC
TO USERS Thank you for your favor with our products. We are dedicated to providing high performance and high stability radio communication products. This two-way radio is no exception. This product is a high performance intercom with UHF frequency band, which can meet the needs of most industries. In order to make you fully understand the various advantages of the radio performance and use and maintenance methods, please read this manual carefully.
Function Introduction 1、Frequency: FM 87-108MHz(RX) UHF400–520 MHZ (RX/TX) 2、Up to 16 Channels 3、FM Radio 4、Chinese/English Language 5、50 Groups CTCSS，105 Groups of standard DCS 6、Time-out timer(TOT) 7、High/Low Power are optional 8、Broad band/Narrow band 9、Battery saving function 10、VOX 11、Busy Channel Lockout (BCL) 12、Low Battery Voltage Warning 13、Carrier mode to scan 14、Channel information broadcast 15、Frequency Hopping Techniques 16、Programmable by PC
Safety Information Please read the following information in order to use this two-way radio safely and efficiently. 1. The maintenance work of the two-way radio can only be carried out by professional technical personnel; assembly/dis assembly without permission is prohibited; 2.
Safety Information 11. Keep the two-way radio at least 2.5cm from the head or body during transmitting. 12. If you are wearing the portable two-way radio on your body, make sure that the antenna is at least 2.5cm away from the body when the two-way radio is transmitting. 13. If the two-way radio has any odor or smoke, turn off the power immediately and contact your dealer.
Familiar with the machine Channel Knob Antenna Power and Volume Knob LED Indicator Light PTT Button Earphone/Mic Socket Loudspeaker MONI Button Microphone 01
熟悉本机 Power and Volume Knob Rotate the knob clockwise to turn the radio on or to increase the volume, and rotate the knob counter-clockwise to turn the radio off or to decrease the volume. LED Indicator Light The radio lights up red when it is transmitting and green when it is receiving.When the battery voltage is low, it flashes red. Channel Knob Rotate to select the appropriate channel. PTT When transmitting, press this button and speak to the microphone; release the button to receive.
Basic Operation Power on/off To turn on the power, turn the【Power and Volume】knob clockwise until you hear a "click" sound and a short beep sounds. To turn off the radio, turn the knob counterclockwise until you hear a click. Adjusting the Volume After turning on, turn the 【Power and Volume】 knob clockwise to increase the reception volume, and turn counterclockwise to reduce the reception volume. Selecting the Channel Turn the 【Channel】Knob to select your desired channel.
Basic Operation select a squelch level that is too high, you cannot receive a weak signal;If the squelch level you choose is too low, the signal will appear in the background noise. 1、 Use the computer to open the PC programming software, please select the model and click the model information, Then the software will pop up the model information dialog box, select the model and frequency range of the radio, and then select "OK".
Basic Operation Receive the signal When you receive a signal in the current channel, the LED indicator light is green. ●If the received signal is weak and you have set a high squelch level for the radio, you may not be able to hear the signal. ●Your local dealer may set up QT/DQT signaling on your radio.When you select the channel where this feature is set, you will only hear signal from the same signaling.All other signal will not be heard.
Basic Operation ●Press and hold the 【M】 key to turn on radio, then radio turn on the scan function. The scan starts from the current channel, the signal light is flashing "green", and press the 【M】 key again to exit. ●A green light occurs when the scan is paused on a channel. ●At any time during the scan, press the 【PTT】 key to pause the scan.The radio returns to the channel on which the last received signal was transmitted.
Basic Operation 4、Press 【M】 to exit the scan. FM Radio Press and hold the 【MONI】 key to open the radio and enter the FM Radio state, then press the 【MONI】 key to search the station, and press the PTT to exit the FM radio. Busy Channel Lockout(BCL) To activate this function, when the channel is being used by other users, press 【PTT】 key, the radio will cannot transmit and "beep, beep" prompt sound;Then release the PTT to stop the alarm sound and return to the receiving mode.
Basic Operation Automatic Battery Saving Function The function can be set by PC programming software. This function starts when the machine does not receive a signal or does not perform an operation for more than 5 seconds. The machine automatically stops this function when it receives a signal or performs an operation. Channel information broadcast If you want to know the transmitting and receiving frequencies of the current channel, you can press 【MONI】and then press the 【PTT】 key.
Basic Operation VOX Turn On and Off with PC programming software. In the CH1 channel by press 【PTT】+【MONI】key to power on radio. Frequency Hopping Techniques This function can be turned “ON” or “OFF” through the PC programming software.If you turn this function on, you can't talk to the radio that turns this function off. Note: only channel added CTCSS and CDCSS are available.
Basic Operation CTCSS (50 Group）/CDCSS(210 Group） CTCSS/CDCSS is mainly used to avoid receiving unrelated calls on the same frequency. If CTCSS/CDCSS is set, only calls with the same tone signal set in the channel can be received within the effective communication range. However, if CTCSS/CDCSS signaling is not set up, all calls on the same channel in the valid communication range can be heard. The CTCSS/CDCSS can be set by write software or manually. You can set the parameters with PC programming software.
CTCSS 67.0 91.5 123.0 162.2 189.9 229.1 69.3 94.8 127.3 165.5 192.8 233.6 71.9 97.4 131.8 167.9 196.6 241.8 74.4 100.0 136.5 171.3 199.5 250.3 77.0 103.5 141.3 173.8 203.5 254.1 79.7 107.2 146.2 177.3 206.5 82.5 110.9 151.4 179.9 210.7 85.4 114.8 156.7 183.5 218.1 88.5 118.8 159.8 186.2 225.
CDCSS B．数字亚音频DQT：（共 210个） D023N D074N D165N D261N D356N D462N D627N D025N D114N D172N D263N D364N D464N D631N D026N D115N D174N D265N D365N D465N D632N D031N D116N D205N D266N D371N D466N D645N D032N D122N D212N D271N D411N D503N D654N D036N D125N D223N D274N D412N D506N D662N D043N D131N D225N D306N D413N D516N D664N D047N D132N D226N D311N D423N D523N D703N D051N D134N D243N D315N D431N D526N D712N D053N D143N D244N D325N D432N D532N D72
CDCSS D023I D074I D165I D261I D356I D462I D627I D025I D114I D172I D263I D364I D464I D631I D026I D115I D174I D265I D365I D465I D632I D031I D116I D205I D266I D371I D466I D645I D032I D122I D212I D271I D411I D503I D654I D036I D125I D223I D274I D412I D506I D662I D043I D131I D225I D306I D413I D516I D664I D047I D132I D226I D311I D423I D523I D703I D051I D134I D243I D315I D431I D526I D712I D053I D143I D244I D325I D432I D532I D723I D054I D145I D2
Technical Specification General Frequency range UHF400-520MHz Modulation type Memory channels 16 Groups Maximum deviation(W/N) ≤5KHz/≤2.5KHz Operation voltage DC 7.4V Spurious emission ≤7.5uW Frequency stability ±2.5ppm Adjacent channel power ≤-65dB/≤-60dB SNR Operation temperature -20℃—+50℃ Antenna impedance Mode of operation 50Ω Simplex at the same frequency or simplex at different frequency 16K¢F3E/11 K¢F3E ≥-45dB/≥-40dB QT/DQT (W/N) 0.7±0.1KHz/0.4±0.
Version No.
