TDS

Material Safety Data Sheet PhotoDeco activa
EC 1907/2006 EU830/2015
Rev 16/03/2016 (previous Oct 2015)
8.2 EXPOSURE CONTROLS:
ENGINEERING MEASURES:
Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust
ventilation and good general extraction.
Protection of respiratory system: Avoid the inhalation of vapours.
Protection of eyes and face: It is recommended to dispose of water taps or sources with clean water close to the working area.
Protection of hands and skin: It is recommended to dispose of water taps or sources with clean water close to the working area.
Barrier creams may help to protect the exposed areas of the skin. Barrier creams should not be applied once exposure has occurred.
OCUPATIONAL EXPOSURE CONTROLS: Directive 89/686/EEC~96/58/EC:
As a general measure on prevention and safety in the work place, we recommend the use of a basic personal protection equipment
(PPE), with the corresponding EC marking. For more information on personal protective equipment (storage, use, cleaning,
maintenance, type and characteristics of the PPE, protection class, marking, category, CEN norm, etc..), you should consult the
informative brochures provided by the manufacturers of PPE.
Mask: # No, unless ventilation is insufficient
Goggles: Safety goggles designed to protect against liquid splashes, with suitable lateral protection (EN166). Clean daily and disinfect
at regular intervals in accordance with the instructions of the manufacturer.
Face shield: No.
Gloves: Use suitable protective rubber or PVC gloves (EN374), when the product is handled for prolonged periods. When
you only expects a short contact, it is recommended to use gloves with a protection level 2 or higher, with a breakthrough time >30 min.
The breakthrough time of the selected glove material should be in accordance with the pretended period of use. There are several
factors (for example, temperature), they do in practice the period of use of a protective gloves resistant against chemicals is clearly
lower than the established standard EN374. Do not use PVA gloves as PVA does not resist water. The gloves should be immediately
replaced when any sign of degradation is noted.
Boots: No.
Apron: No.
Clothing: No.
Thermal hazards:
Not applicable (the product is handled at room temperature).
ENVIRONMENTAL EXPOSURE CONTROLS:
Avoid any spillage in the environment. Avoid any release into the atmosphere.
Spills on the soil: Prevent contamination of soil.
Spills in water: Do not allow to escape into drains, sewers or water courses.
Emissions to the atmosphere: Because of volatility, emissions to the atmosphere while handling and use may result. Avoid any
release into the atmosphere.
VOC (product ready for use*): It is applicable the Directive 2004/42/EC, on the limitation of emissions of volatile compounds due to
the use of organic solvents: PAINTS AND VARNISHES (defined in the Directive 2004/42/EC, Annex I.1): Emission subcategory c)
Coating for exterior walls of mineral substrate, water-borne. VOC (product ready for use*) ( Producto listo al uso. ) : 0,2 g/l* (VOC max.
40. g/l* starting from 01.01.2010).