Owner`s manual
11 12
ASSEMBLY AND OPERATING INSTRUCTIONS
AdjustingTheSpray
The adjustable spray nozzle can be adjusted from fan to jet. The spray is adjusted from jet
to fan spray by turning the nozzle.
Working with detergent ensures a quick soaking of the dirt, and allows the high-pressure
water to penetrate and remove the dirt more effectively. Always spray detergent on a dry
surface, do not pre-soak area. Wetting the surface rst dilutes the detergent and reduces
its cleaning ability.
CAUTION
Makesurethegunsafetylockisengagedsothetriggercannotbesqueezedwhile
thedetergentnozzleisbeingattached.
USING THE ACCESSORIES WORKING WITH DETERGENTS
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION
Damagemayoccurtopaintedsurfaceifchemicalisallowedtodryonsurface.
Washandrinseasmallsectionatatime.Avoidworkingonhotsurfacesorindirect
sunlight.
WARNING
Neverusebleach,chlorineproductsandothercorrosivechemicals.Neveruseliquids
containingsolvents(i.e,paintthinners,gasoline,oils).Neveruseammoniaproducts.
Neveruseacid-basedproducts.
Theseproductscancausephysicalinjuriestotheoperatorandirreversibledamageto
themachineand/ordamagethesurfacebeingcleaned.
CAUTION
Jetsprayadjustmentisveryaggressive.Donotadjustwhilespraying.
1
2
2
1
3
Do not allow the detergent to dry on the surface that you are cleaning.
Release the gun safety lock and pull the trigger to operate the unit and apply detergent.
Attach the detergent wand onto the gun as shown. Make sure all components are
locked.
4
Fill the detergent container with detergent only. Do not put any water into container.










