Owner`s manual

13 14
CAUTION
Neveruse:
•Bleach,chlorineproductsandothercorrosivechemicals
•Liquidscontainingsolvents(i.e.,paintthinners,gasoline,oils)
•Tri-sodiumphosphateproducts
•Ammoniaproducts
•Acid-basedproducts
Thesechemicalswillharmtheunitandwilldamagethesurfacebeingcleaned.
TAKING A BREAK
1
3
2
Engage gun safety lock.
Unplug the power cord from the outlet.
Turn unit to “OFF” (O) position.
If taking a break of five minutes or more:
SHUTTING DOWN AND CLEANING UP
2
2
2
1
1
1
3
3
3
Press trigger to release any remaining water pressure.
Turn off the water supply.
Unplug the power cord from the outlet.
4
4
4
5
6
Turn the switch to “OFF” (0) position.
WARNING
Turnoffwatersupplyandsqueezetriggertodepressurizetheunit.Failuretodoso
couldresultinpersonalinjuryduetodischargeofhigh-pressurewater.
Disconnect the garden hose from the unit.
Engage the gun safety lock.
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION
Draingunassemblyofanyremainingwater.Aimgundownwardsandsqueezetrigger.
WINTERIZING AND LONG-TERM STORAGE
OPTIMUM WINTERIZING PROCEDURE
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using Pressure Washer Pump Saver (39-8602-0).
This will keep the internal parts lubricated, protected from rust, and prevents the pump
from freezing.
Connect Pressure Washer Pump Saver hose onto the adaptor and quick-connect
coupling.
Depress button on top of Pump Saver container.
Continue until uid exits the pressure hose.
Remove the hose from pump inlet.
QUICK WINTERIZING PROCEDURE
If you cannot do the Optimum Winterizing procedure, you can still protect your pressure
washer from winter-damage by doing below:
Disconnect all water connections.
Turn on the machine for a few seconds,
until the remaining water in the pump
exits. Turn off immediately.
Do not allow high-pressure hose to
become kinked.
Store the machine and accessories
in a room that does not reach freezing
temperatures. Do not store near
furnace or other sources of heat as it
may dry out the pump seals.
Recommended: Pressure Washer Pump
Saver (39-8602-0)