UVS-7111 User's Manual Content Contents Contents ....................................................................................................................................2 Package Contents .....................................................................................................................3 System Requirements .............................................................................................................4 Introduction ...............................................
Packaging Contents UVS-7111 User's Manual Package Contents The UVS-7111 Video Server is provided with the following accessories. Please contact your dealer if any one of the following is missing. 1. UVS-7111 Video Server 2. 12V DC power cable 5. Warranty card/certificate 6.CD (User's Manual/Quick Guide/NVR Manual/IP Finder) 7.
UVS-7111 User's Manual System Requirements System Requirements UVS-7111/7111P/7111W Video Server Internet Environment LAN Wireless LAN Monitor System Requirements 10/100M Ethernet 802.11b or 802.11g OS support Browser support Windows 2000 Professional SP4, XP Home SP2 Internet Explorer 6.x or later Hardware CPU: Pentium 4 2.
Introduction / Features and Advantages UVS-7111 User's Manual Introduction The UVS-7111/7111P/7111W Video Servers convert any digital camera into a full functional IP camera. You can obtain all of the benefits that digital technology offers without scrapping your investment in an analog system. These products digitize analog video signals and will send digital images directly over any IP network, such as LAN, intranet and Internet.
UVS-7111 User's Manual System Instructions System Instructions 1. DC power cable: The DC input connector has a socket to connect the product to a power source. 2. Ethernet connector: An RJ-45 connector is provided for connection to the 10Base-T Ethernet cable or 100 Base-T High Speed Ethernet cable. This port can automatically detect or coordinate the transmission rate of the network. 3. Use a video/audio output cable for external video/audio transmission if required.
System Instructions UVS-7111 User's Manual Audio/Video Output Plug the audio/video source of your camera into the Audio/Video input, and connect your monitor or recording equipment to the Audio/Video output. (Note: Most cameras use a BNC connector, if your camera does not use BNC, please consult your dealer or retailer to purchase.) LAN Socket Connect the LAN cable into the LAN socket. External alert bus (DI/DO) For more information about DI/DO, refer to Attachment A.
UVS-7111 User's Manual Hardware Installation Hardware Installation 1. Select the installed place This product can be installed on any convenient flat surface, or concealed in a ceiling etc. . (Note: Please do not install in an enclosed unventilated space. Doing so might cause abnormal operation for the product.) 2. Connect to the RS-485 interface Plug one end of your control cable in the RS-485 socket on the back of the camera and connect the other end to your product. 3.
Camera Settings UVS-7111 User's Manual Camera Settings After the hardware has been installed, insert the supplied CD in the computer and execute the file IP FINDER.EX following the steps below to search for and change the IP address of the video server. 1. Start the machine. Execute the IP Finder.exe from the supplied CD. 2. Find the camera (Search) Search for the product from your LAN. The factory IP setting 192.168.0.20 appears on the screen. 1. Click Search to find the Video Server on the LAN. 3.
UVS-7111 User's Manual Camera Setting 5. Confirmation When all changes have been confirmed, click Exit to quit. 4. When all changes have been confirmed, click Exit to quit. Note: 1. The IP FINDER can only find the IP addresses of a video server that shares the same hub on the LAN. For information about finding IP addresses on the Internet, refer to the “DDNS Setting”, or “UpnP Setting”. 2. All UIC camera/network server products can be found and changed using the IP FINDER software. 3.
Camera Setting from a Router UVS-7111 User's Manual Camera Setting from a Router You can use DHCP when you want to use the video server on the Intranet (LAN). However, the IP must fixed when you want to use the product on a WAN. For this application, it is required to set up a virtual server on the ADSL router. Follow the steps below to complete the setting: 1. Enter the camera setting page to set a fixed IP. (Refer to the “Network Setting”.) Ex.: 192.168.0.49 2. Enter the ADSL router main setting page.
UVS-7111 User's Manual Change the Internet Explorer Setting Change the Internet Explorer Setting This product uses ActiveX Control to play images and sound on your PC. The ActiveX Control application software will be downloaded to your PC when you connect it to the Internet. To ensure successful download of the software, the Internet Explorer "security settings" must be changed accordingly. Make sure that the security level is set to Level II, the commonly used default security level.
Enter the Main Page UVS-7111 User's Manual Enter the Main Page 1. Open the IE browser and key in the IP address of the product. Key in the IP address of the camera When the login screen appears, key in "root" in the User Name and Password fields. Click OK. Camera login screen 2. Key in the default "username" and "password".
UVS-7111 User's Manual Enter the Main Page 4. The security warning screen appears. Click "Install". The ActiveX Control is named "UIC ActiveX Control". This software is owned by UIC and well certified. You can use it without any doubts about its validity. Click " Install ". 5. When ActiveX Control is installed successfully, you will see the camera image and interface.
Camera Main Page UVS-7111 User's Manual Camera Main Page Descriptions: Source: Information bar 1. Format: resolution of the current video stream 2. FPS: Frame Per Second of the current video stream 3. BitRate: bandwidth per second of the current video stream Brand Logo - Click to access the latest information from our website. Product name Image area Attention: Please change the streaming setting to HTTP if nothing appears in the image area.
UVS-7111 User's Manual Camera Main Page Control panel All camera/network server products using Pelco-D, Pelco-P, A-linking and UIC drivers can be controlled using the UVS-7111 Video server. For more information, please go to our website. 1. Camera direction: controls the direction of the camera (up, down, left, right, home position). Direction control. 2. Camera speed: controls the rotation speed of the camera from "1" (lowest) to "7" (highest). Rotation speed. Speed Angle/Sec.
Camera Main Page UVS-7111 User's Manual 3. Preset: presets the rotation points for the camera (16 points) 1. Click Set to enter the Preset Setting screen. 3. Control the camera direction. 2. Enter the name of the location. 4. Click Update to exit. 5. Select the number you need and click Go. The camera moves to the area automatically as set up by the selected number.
UVS-7111 User's Manual Camera Main Page 4. Tour: enables/disables the tour mode of the camera. The rotation points of the camera must be set up in advance. 1. Click Set to enter the Tour Setting screen. 2. Name the tour. You can set up 5 tour groups at maximum. 3. Dwelling time (sec.) at each tour point. 5. Click Update to Exit. 4. Select a preset location for the camera. 6. Click Enable to activate the tour function. 5. AutoPan: enables/disables AutoPan.
Camera Main Page UVS-7111 User's Manual 6. Alert: displays alert trigger This indicator flashes to warn you when a movement or alert is detected. Click to stop the flash. Alert trigger display AutoPan function Enable/ disable the alert message display Alert message display area Enable/ disable the alert message Save function 7. Alert Message: enables/disables the alert message display. Alert Message displays the alert message. Press Enable/Disable to enable or disable the alert display message.
UVS-7111 User's Manual Camera Main Page 8. Language: selects a UI language Two languages are available: English and Chinese. Selects a language 9. Camera Position: sets the position for display of the image Desktop: Normal image (displays on the desktop; default value) Ceiling: Upside-down image Mirror: Mirror image Rotate 180: Mirrored and upside-down. Set the position for display of image. 10. View Size: selects the size of the image Select the size of the image from 0.5 to 4X.
Camera Main Page UVS-7111 User's Manual 11. Streaming: sets the video stream protocol (HTTP is recommended) This product provides three different video streaming protocols: UDP, TCP, and HTTP. HTTP is recommended because it allows the video stream to go through the firewall. (Refer to Setting/Basic Setting/Network/Streaming for more information). UDP: provides the fastest but most unreliable transmission service.
UVS-7111 User's Manual Camera Main Page 12. Brightness: adjusts video brightness / Contrast: adjusts video contrast Press + (increase) or - (decrease) from the setting window to adjust the brightness or contrast of the image. Adjust brightness / contrast of the image 13. REC: executes the video recording function Click this button to start video recording and save the image file in the preset directory (C:\video).
Camera Main Page UVS-7111 User's Manual 15. Path: sets the save path and name for recorded images and snapshots. The filename is the recording date by default. You can identify the file by prefix of the filename. Click the Path field to select the folder to save the file. Save the path Pickup function Automatic Noise Suppression system 16. Audio On/Off: turns on/off the pickup function Click the button to mute the sound from the built-in microphone.
UVS-7111 User's Manual System Settings / Basic Settings System Settings System setting contains basic and application settings. The basic setting is executed for basic system information, transmission speed, audio/video code, user authorization, date/time, and IP filter, while the application setting is executed for event triggering definition and other relevant settings, definition of the motion detection area, firmware update, reset to factory default, and reboot.
Basic Setting UVS-7111 User's Manual Basic Setting >Video/Image Basic Setting > Video Image > Video Image ◦ Basic Setting > Video / Image > Video Image > 3GPP To view the product image using a 3G cellular phone, click Enable to enable the 3GPP mode. (Note: When the 3GPP mode has been activated, all relevant parameters are set automatically and cannot be changed. This is for the sake of compatibility). 3GPP mode To use the 3GPP function, the following requirements must be met.
UVS-7111 User's Manual Basic Setting 4. Enter the link name. 6. Select OK to save the setting. 5. Enter the IP address of the camera, e.g. rtsp://xxx.xxx.xxx.xxx:554/cam1/3gpp 8. Select “Yes” to connect. 7. Select this stream name to proceed with linking. 9. Connecting. 11. Video stream screen . 10. Loading the image.
Basic Setting UVS-7111 User's Manual ◦ Basic Setting > Video / Image > Video Image >Video Format You can select MPEG4 or MJPEG as the video format. It is recommended to select MPEG4 for real-time browsing to optimize the bandwidth. MJPEG is a good choice for the best resolution when video recording is required for collection of evidence.
UVS-7111 User's Manual Basic Setting ◦ Basic Setting > Video / Image > Video Image >Frame per Second (FPS): With NTSC, you can choose 1, 2, 3, 4, 5, 6, 7, 10, 15 or 30 for video resolution With PAL, you can choose 1, 2, 3, 4, 5, 6, 12, 25 for video resolution. Select a FPS ◦ Basic Setting > Video / Image > Video Image >Video Quality You can select Fix Quality (resolution priority) or Fix Bitrate (fluency priority) at the same bandwidth.
Basic Setting UVS-7111 User's Manual Select GOP to update the speed. GOP provides users with the function to set the pages of the I Frame and P Frame to be transmitted in the MPEG4 mode. Basically, the I Frame page contains the entire picture and needs higher bandwidth, while the P Frame page only contains the parts that are different from the I Frame and needs lower bandwidth. Hence, when you need to transmit the pages without disruption in a normal network environment, you can set up a higher GOP.
UVS-7111 User's Manual Basic Setting Basic Setting > Audio (Sound) Basic Setting > Audio > Audio (sound setting) ◦ Basic Setting > Audio > Audio > Audio Raw Format You can select No Audio or PCM. When you select No Audio, the sound transmission from the built-in microphone pauses. When you select PCM, the sound transmission resumes. The factory default is PCM.
Basic Setting UVS-7111 User's Manual Basic Setting > PTZ Basic Setting > PTZ > PTZ ◦ Basic Setting > PTZ > PTZ > PTZ camera Port Setting This product supports the PTZ control of those analog PTZ cameras use the drivers of Pelco-D, Pelco-P and A-Linking. Refer to the user manual of your PTZ cameras, and you will know which driver to select. Moreover, select the serial number (address) of the targeted PTZ camera for controlled setting. (Note: RS-485 can cascade numbers of cameras that use same driver.
UVS-7111 User's Manual Basic Setting ◦ Basic Setting > PTZ >PTZ Driver Manager In the Camera Driver column, list all the drivers that are installed in the video server. Select “Delete” to eliminate any selected driver. Driver Upload Driver Manager Setting ◦ Basic Setting > PTZ > PTZ Driver Upload Upload other drivers from our website for support of more cameras. ◦ Basic Setting > PTZ > Serial Port Setting Baud rate is a measure of the symbol rate.
Basic Setting UVS-7111 User's Manual ◦ Basic Setting > PTZ > Serial Port Setting > Stop bits Bit used in asynchronous communications to indicate the end of a piece of data. Refer to the user manual of your camera for the accurate figure. Stop Bits setting ◦ Basic Setting > PTZ > Serial Port Setting > Parity Parity is a concept of equality of status or functional equivalence. Refer to the user manual of your cameras for the accurate figure.
UVS-7111 User's Manual Basic Setting Basic Setting > User(User) The administration of the camera can set up access privileges by administrator, operator, and viewer to ensure the security and control of the camera. The access privileges and setting steps are described as below. Basic Setting > User > User List (access privilege list) The access privileges of the administrator, operator, and viewer are listed as follows.
UVS-7111 User's Manual User setting Change the privilege or password of a user. You cannot change the name of the user. Add a new user and set up a different privilege. Delete a user from the list. Log in the username, password and privilege as required. You can also define the PTZ control here. Basic Setting > User > User Setting (privilege setting) For special business situations, this product allows you to log in to browse without the need of keying in your username and password.
Basic Setting UVS-7111 User's Manual Basic Setting > Network (Network setting) Basic Setting > Network > Network (cable network setting page) ◦ Basic Setting > Network > Network > IP Assignment Cable network setting page DHCP setting: DHCP(Dynamic Host Configuration Protocol) is a protocol that enables automatic assignment of TCP/IP information to the client. Each DHCP client connects to the DHCP server to access its network setting information, including IP address, gateway, and DNS server.
UVS-7111 User's Manual Basic Setting Basic Setting > Network > Wireless (wireless network setting page) Note: Only UNC-9711W provides the wireless networking function. UNC-9711 and UNC-9711P do not provide this function. The cable network setting procedure shall apply where the LAN socket is connected to the network cable. Where wireless network is required, you need to remove the network cable after completing the wireless network setting and restart the machine.
Basic Setting UVS-7111 User's Manual Mode: Selection of the wireless networking mode 1. Infrastructure: Infrastructure networking mode Thiscamera uses the wireless Access Point (AP) as the hub when set to infrastructure networking mode and connects to the network via the wireless AP. INTERNET ADSL MODEM BASE STATION WORKSTATION 1 WORKSTATION 2 Infrastructure networking mode AdHoc networking mode 2.
UVS-7111 User's Manual Basic Setting SSID: Service Set Identifier Enter the name of the base station (AP) to which you want to connect. Base station SSID name Base station encryption settings WEP Encryption: WEP encryption function When the base station (AP)which you want to access has enabled the encryption function, you need to acquire the following information by accessing its encryption settings.
Basic Setting UVS-7111 User's Manual Then change the settings on the wireless networking setting page to make them conform to the settings of the base station. Base station with enabled encryption function Encryption mode Encryption authentication type Encryption group WEP security mode: Select an encryption mode from the list. The format is “None” by default, indicating that the security function is disabled.
UVS-7111 User's Manual Basic Setting Ex.: Wireless mode setting (applicable to most situations) Selection: 1. Mode: Select Infrastructure to connect the camera to a wireless base station. 2. Authentication Type: Select Shared Key. 3. SSID: Enter the server name of the base station. 4. WEP Encryption: Select the encrypted key that is the same as the base station. 5. KEY: Select a group that is the same as the wireless base station. You must select KEY1 for base stations that only have a set of keys. 6.
Basic Setting UVS-7111 User's Manual Basic Setting > Network > Streaming (steaming setting) Setting of the video steaming port (HTTP and factory default are recommended) 1. HTTP Port 80 can pass through most firewalls. Video streams are transmitted through HTTP Port (80 by default) to ensure passage through firewalls. 2. RTSP Port 554 uses a fixed port (i.e. TCP) or can be defined by users to ensure reliable data transmission.
UVS-7111 User's Manual Basic Setting Basic Setting > Network > PPPoE (dial-up networking setting) PPPoE: Point-to-Point Protocol over Ethernet is a protocol that supports access to a high-speed wideband network using a PC and a wideband modem (such as xDSL, Cable, Wireless modem). The user need only to equip the PC with an Ethernet card and apply to ISP (such as HiNet) and ADSL provider (such as Chunghwa Telecom) for ADSL service to roam the Internet through ordinary twisted copper wires.
Basic Setting UVS-7111 User's Manual Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting) The IP address (Ex. 210.168.0.22) is like a telephone number, while the website address is like a name in an address book. The DDNS allows the user to access the website by entering the name of the website without memorizing a bunch of cold numbers. When you apply for an Internet service, you will have at least one IP address from your ISP that is either fixed or dynamic.
UVS-7111 User's Manual Basic Setting Basic Setting > Network > UPnP (Universal Plug and Play) If you connect your camera to a router, IP allocator, or wireless AP, your camera will possibly be blocked by the NAT and can’t be located on the Internet. To penetrate the firewall, activate the supportive item- UPnP. The Link URL shows the external IP address and the port of the router. Enter the IP address in the Internet Explorer to penetrate the NAT.
Basic Setting UVS-7111 User's Manual 2. Open Windows firewall option 2. Click Exceptions 3. Check UPnP Configuration. 1. Click Windows Firewall in the Control Panel 3. View the connection device using My Network Places 1. Open My Network Places 2. The LAN camera appears. Double-click to access the main page.
UVS-7111 User's Manual Basic Setting Basic Setting > Network > SMTP Server (mail server setting) Thiscamera is able to transmit images to a particular email address when a motion detection event occurs or a sensor is triggered. To use this function, a mail server setting for the camera is required. Enter the following information in sequential order to complete the setting: ・SMTP server: the SMTP server IP address. ・SMTP From: the email of the sender, i.e. xxx@xxx.
Basic Setting UVS-7111 User's Manual Basic Setting > Network > Samba This camera is able to upload the snapshots to a specified shared folder when an event is triggered. To use this function, a Samba setting is required. Options: Active: Samba Authentication: Username: Password: Path: Enable/Disable Enable/Disable the username the password specify the IP address of the computer you want to share with and the file name, i.e. 192.168.0.X/xxx Shared Folder Size (MB): the total capacity of the folder.
UVS-7111 User's Manual Basic Setting Basic Setting > Network > Notification Of IP Address Change (IP address change notice) This setting is not necessary for a fixed IP. For a dynamic IP, you need to update the IP address every time you connect to the Internet to access the camera. This setting allows you to update the IP address by the automatic notification of IP address change. Choose one of the following three notice options to update the IP address: 1.
Basic Setting UVS-7111 User's Manual Basic Setting > Date/Time (date/time setting) Date/Time setting ◦ Basic Setting > Date/Time > Server Time (the date/time of the server) ◦ Basic Setting > Date/Time > PC Time (the date/time of your PC) ◦ Basic Setting > Date/Time > Time Setting (date/time setting) There are three ways to synchronize the time. 1. Synchronize the time with PC’s time: 2. The preset method of time synchronization of the camera time with your PC time.
UVS-7111 User's Manual Basic Setting Basic Setting > IP Filter This function filters IP addresses and is able to allow or deny visits from particular addresses/target addresses. IP filter setting ◦ Basic Setting > IP Filter > General ◦ IP Filtering: enables/disables the IP filter Policy: allows/denies access ◦ Basic Setting > IP Filter > Filter IP Address (Overview of the set IPs) Add : enter the IP address you want to allow or deny the access of in the front field.
Basic Setting UVS-7111 User's Manual Application Setting Application Setting > Event (event trigger setting page) This camera is equipped with intelligent security management functions. It ensures security monitoring by allowing user to define “ trigger events ” based on particular times and situations, and sets the camera respond to the event.
UVS-7111 User's Manual Basic Setting Add Event : Add Event setting page Options: • General: Name: Name the trigger event here. • Response to event trigger: the time setting of the trigger event Always: Always monitoring During time: Check the date you want to monitor (Sun~Sat) and the duration of monitoring here.
Basic Setting UVS-7111 User's Manual Application Setting > Event > Trigger (manual test of trigger response) Whenever the camera detects abnormal events during the scheduled time, it will automatically respond by performing trigger response. There are 3 types of trigger responses: alarm sending, LED status indicator flash, andemailing the alarm or recorded image to the specified server. To use this function, enter the server information by accessing Application Setting > Event > Event Server.
UVS-7111 User's Manual Basic Setting Application Setting > Event > Event Servers (setting for uploading trigger event file to the server) Here you can perform a complete setting for uploading files to the server. Please set servers (SMTP, FTP, SAMBA…etc) in the Event Server setting by the instructions below: Click Add Ftp to go to the setting page and enter the information of the FTP server you specified.
Application Setting UVS-7111 User's Manual Click Add Http to go to the setting page and enter the information of the HTTP server you specified. Add HTTP setting page Name Network Address Login Password Proxy ProxyPort ProxyLogin Proxy Password HTTP name HTTP IP address Log-in name Log-in password Proxy server name Proxy server port Proxy server log-in name Proxy server log-in password Click Add Tcp to go to the setting page and enter the information of the TCP server you specified.
UVS-7111 User's Manual Application Setting Application Setting > Motion Detection You can open the setting frame by clicking on the area to monitor. To move area to monitor, drag the area with your mouse; to adjust the size of the frame, drag the arrow to adjust after you move the mouse to the edge of the area and left-click; There are 3 frames available for setting. You may adjust the sensitivity of the area by entering the degree of sensitivity in the “Sensitive” field.
Application Setting UVS-7111 User's Manual 4. Click Browse… to select the location where the firmware file is stored. 5. Click submit. 6. The auto upgrade runs. The Upgrade Status shows the progress of the upgrade. When the firmware upgrade has been completed, the machine reboots automatically. Reconnect to the server after 60 seconds.
UVS-7111 User's Manual Application Setting Application Setting > Factory Default You can use this function to reset to factory default, but all changes, including the IP address, you have made are deleted. Factory Default: Reset to factory default. Warning dialog for rest to factory default Resets all parameters, except the IP parameters: You can use this function to reset to factory default.
Application Setting UVS-7111 User's Manual Backup: Data backup Back all parameters: Back up all changes you have made. When you click Backup , a file download window appears. Back up the file named param.bin (Attention: Don't change the file name; otherwise, the backup may fail.) File backup Restore backup parameters: You can select this function to restore the changes you have made. To do this, click Browse … to select a backup file and click submit to confirm the restoration.
UVS-7111 User's Manual Application Setting Application Setting > Reboot You can enable this function for the camera to reboot automatically.
Attachment A: External Alarm UVS-7111 User's Manual Attachment A: External Alarm In addition to the motion detection executed by the internal software application, the camera can connect to external infrared detectors, beepers, and smoke detectors. For more information about these external devices, contact to your local retailer, dealer or installation service provider. This camera provides a standard Alarm I/O for you. This product is provided with 2 sets of digital inputs and 1 set of digital outputs.
UVS-7111 User's Manual Attachment C: Troubleshooting and FAQs External Alarm I/O Circuit Diagram Warning! • Where connecting of a low or high current loop to the external alarm input/output of the camera is required, the wiring and connection shall be conducted by a qualified electrician. Incorrect wiring may bring about damage to the camera or product fatal electric shock.
Attachment B: Bandwidth Estimation UVS-7111 User's Manual Attachment B: Bandwidth Estimation Since the FPS is dependent on the bandwidth of the camera, the relationship between the size of an image file and the bandwidth is always the major concern of the system construction engineer. The table below shows the relation between the resolution and size of an MJPEG file in the NTSC system.
UVS-7111 User's Manual Attachment C: Troubleshooting and FAQs Attachment C: Troubleshooting and FAQs Answer and Solution Question Function What encoder and decoder The camera uses MJPEG or MPEG4 compression technology to provide are used by the camera for quality images. MJPEG is a standard image compression technology applicable to different browsers without the need to install additional sounds and images? software.
Attachment C: Troubleshooting and FAQs UVS-7111 User's Manual Internet Explorer does not Please be sure that the version of your Internet Explorer is 6.0 or later. display the camera screen Should you have any difficulties, please log on the Microsoft website to correctly. update your browser.Microsoft website: http://www.microsoft.com/windows/ie. IP Finder cannot store network parameters. • Do not use spaces. Use underline “_” or dash “-“. • Your connection might have problems.
UVS-7111 User's Manual Internet Explorer displays Change the IE security setting to allow downloading unsigned ActiveX the following message: control. Downloading the ActiveX control is prohibited under the current security setting. The camera can operate only in the LAN rather in the Internet environment. • A firewall mechanism might have been activated. Check the setting of your system or ask your network administrator.
UVS-7111 User's Manual Function Camera has a problem focusing. • The lens might be contaminated with dust, fingerprints, or other dirt. Use a special cleaning cloth to clean the lens or adjust the focus manually . • Focusing might be impossible in some cases. If the object is too close to the lens, more it away from your camera. Color of the video stream is too deep or light. • Please confirm that the image your are watching has the best quality.
