Installation Guide

5778-6

Installation Instructions for Model: AV-12-RF

Retro-Fit Vent Cap Designed to Fit Over an Existing Base or Vent Pipe

Step 1:

After you have removed the old head, slide the

replacement head over the existing collar.

Step 2:

Observe the screws located on top of the vent. Use

this as your pattern to attach the vent to the collar.

Tolerance : 1/2”

Step 3:

With the retro fit vent cap in place, use the provided

#8 self-tapping screws ( in total) to secure to the base.

Aura Vent Retro-fit installed on base.