User manual

OptiFlex® 3 Continuous Passive Motion (CPM) Therapy Unit

NOMENCLATURE

PENDANT FUNCTIONS AND USE

Mode: Used together with Fast Back

™

, Oscillation

Zone

™

and Progressive ROM button to enable and

disable the appropriate mode. All three modes or any

combination may be used at once.

How to Use: Press Mode button along with desired

function (Fast Back, Oscillation Zone and/or

Progressive ROM).

Fast Back

™

: When the carriage reaches 15° less

than the Programmed Flexion Angle, it will begin to

slow down. The deceleration rate will be half of the

Programmed Speed when the carriage comes within

10° of the flexion angle. Upon reaching the flexion

angle, the carriage will reverse direction and resume the

Programmed Speed as it moves towards the extension

angle. See Chart 2.

How to Use: While pressing and holding the Mode

button, press the Fast Back button to enable the Fast

Back mode.

NOTE: If both Fast Back and Oscillation Zone modes

are enabled, the carriage will move at the slower of 75°/

min. and half of the Programmed Speed while in the

Oscillation Zone ROM.

Non-Working ROM

Fast Speed

Working ROM

(10°)

Slow Speed

Fast Speed

Working ROM

Speed = 60°/

min.

CHART 2 FAST BACK

F = Programmed Flexion Angle

E = Programmed Extension Angle