Manual

pool
wall
pool floor
3 9 ”
A =
3 ”
D =
1 - 1 / 2 ”
B =
deck surfa ce
3 ”
C =
6 ”
E =
H o w To F in d G u tte r D e ta il & P o o l P ro file
Sample of a Completed Pool Profile Shown Below:
We provide each customer with a gutter detail and pool profile form to ensure a superior custom fit for your pool access system.
The following instructions describe how to accurately complete a gutter detail and pool profile form. If your gutter is not shown on the
foll owing gutter detail form, please draw your gutter in full detail. For faster company response and feedback, the gutter det
ail and pool
profile information may be faxed to us at 701-297-9702. Only one gutter diagram and one pool profile is required to be completed.
Finding Your Pool’s Profile
IMPORTANT NOTE: measurements are from the deck to the pool
floor and NOT the water depth.
B
=
C
=
D
=
E
=
F
=
G
=
H
=
A
=
4 5 - 1 / 2 ”
3 9 ”
1 4 - 1 / 2 ”
4 6 - 1 / 4 ”
4 6 - 3 / 4 ”
4 7 ”
4 7 - 1 / 2 ”
4 7 - 1 / 2 ”
from the deck to the bottom of the curve
distance between A and B
from deck to pool floor at 2’ from the pool wall
from deck to pool floor at 3’ from the pool wall
from deck to pool floor at 4’ from the pool wall
from deck to pool floor at 5’ from the pool wall
from deck to pool floor at 6’ from the pool wall
from the deck to the top of the curve
deck surfa ce
pool
wall
pool
floor



A
B
C
E
D
F
G
H
straight edge, like a shepherd’s hook, with
masking tap e marks. Straight edge is p laced
level on the deck and leads out into the pool.

As you can see above, there are several lettered boxes that each need a measurement,
but don’t allow yourself to be intimidated by this. Just follow the simple directions below.
Start gathering your measurements by using a straight edge item that is long enough to extend out into the pool. A good item to use
would be either the vacuum cleaner handle or a shepherds hook handle.
Once you choose your st raight edge item, mark it with measuring tape for approximate feet out from the de
ck of the pool. We
recommend that you place your measuring tape markers at 2 feet, 3 feet, 4 feet, 5 feet and 6 feet incriments.
Lay a le vel across the top if you have a Bullnose or Angled Edge.
Take your measurements and fill in the appropri ate blanks on your pool profile form. Please see completed Pool Profile example
above.
1.
2.
3.
4.
Finding Your Gutter Detail
To the right of this page, there is an
exam ple of a completed gutter detail.
To complete a gutter detail, simply do
the following:
1.
2.
3.
4. Input your gutter measurements
into the appropriate gutter detail
form provided or draw your own
gutter detail on a seperate sheet of
paper.
Measure all the dimensions of your
pool’s gutter. Follow the gutter
detail drawings as examples of
what to measure.
Locate the gutter detail drawing on
the gutter detail form that match es
your gutter
configuration.
If your gutter configuration does
not match a drawing cur rently on
the gutter detail form, then please
draw your gutter configuration.
Remember: Mea surements are from the deck surface to the pool floor and NOT the water depth.
www.ActiveForever.com AquaTrek