Owner's manual

7
Phase Duration: 50–300 µs
Available Amplitude
Modulation Options: Continuous
Surge
Reciprocation
Available Channels: All
High Volt Mode
75 us
0 volts
500 volts
50 %
8 us
Figure 3.12—High Volt
Waveform
Waveform Type: Monophasic twin peak
Polarity: Positive or negative
Volts: 500 volts peak, 1 Kohm load
Current: 0–500 mA peak, 1 Kohm load
Average current at
maximum intensity
and frequency: 1.2 mA at 120 pps with
1 Kohm load
Maximum current
density under 2"
diameter electrode. 0.06 mA/cm²
Frequency: 1–120 HzzHz
Frequency Modulation: No
Phase Duration: 8 µs at 50% Vmax
Polarity: Positive or negative
Available Amplitude
Modulation Options: Continuous
Surge
Available Channels: Channel One only
Microcurrent Mode
+
-
or
+
-
Figure 3.13—Microcurrent
Waveform
Waveform Type: Monophasic or biphasic
square wave
Polarity: Positive or negative or
biphasic pulses
Volts: 1 Volt peak, 1 Kohm load
Current: 10-990 µA peak, 1 Kohm load
Average current at
maximum intensity
and frequency: 990 µA
Maximum current
density under 2"
diameter electrode. 24.4 µA/cm²
Frequency: 0.5-500 Hz
Duty Cycle: 50%zHz
Frequency Modulation: No
Pulse Duration: 1-1000 ms