Owner's manual

Part No. and Description Qty

81 Bolt, Socket Head (M8 x 1.25 x 70mm) 2

95 Bolt, Hex Head (M6 x 1 x 15mm) 4

96 Bolt, Hex Head (M6 x 1 x 30mm) 4

97 Bolt, Hex Head (M8 x 1.25 x 16mm) 4

94 Bolt, Button Head (M8 x 1.25 x 15mm) 3

114 Bolt, Button Head (M8 x 1.25 x 12mm) 4

101 Bolt, Hex Head (M10 x 1.5 x 85mm) 1

102 Bolt, Hex Head (M10 x 1.5 x 95mm) 1

103 Bolt, Hex Head (M10 x 1.5 x 125mm) 1

109 Large Washer (M8 x ø23 ) 2

105 Nylock Nut (M10 x 1.5) 3

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers, the

end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the

length of the bolts and screws.

NOTICE: The length of all bolts and screws except those with flat heads is

measured from below the head to the end of the bolt or screw.

Flat head bolts and screws are measured from the top of the

head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.

Some hardware may be already attached to the part.

89 Lock Washer (M8) 2