Model #TV920 | Modelo #TV920 Rechargeable Stereo Wireless Headset Auriculares Inalámbricos Estéreo Recargables Instruction Manual Please save for future reference. Manual de Instrucciones Por favor guarde para futura referencia. English: page 2 / Español: página 18 Questions? Preguntas? 1-877-736-6760 / www.unisar.com www.ActiveForever.
Warning Please read all safety and operating instructions carefully and completely before using this product. Thank you for purchasing the Unisar® TV Listener® J3. This infrared wireless stereo headset system will enable you to listen to your television, stereo, computer, or any other audio device at a volume that is comfortable for you without disturbing others in the room.
How It Works The TV Listener J3 works just like your remote control, sending an invisible infrared signal from your television or any other audio device to the deluxe stereo headset. Unlike radio frequency devices, infrared is not subject to interference from cordless phones, wireless networks, microwaves, etc. You adjust the volume on the wireless, lightweight headset to suit your personal needs. Multiple headsets can be used with one transmitter. 6.
Follow these instructions if your equipment only has one audio output jack (mono televisions, DVD players, cable boxes). STEREO INSTALLATION Fig. 1 1. Connect the audio cord on the back of the transmitter (A) to the RCA 3.5mm mono adapter (E). white - LEFT 2. Plug the other end of the adapter into the audio output jack on your equipment. If you are connecting to your television, use the audio jack located on the back. Do NOT use the audio jacks on the front as these are audio input jacks.
LARGE HEADPHONE JACK INSTALLATION Fig. 4 4. Plug the AC adapter (C) into the jack marked “DC IN” on the back of the transmitter and plug the adapter into an electrical outlet. For long periods of non-use, we suggest unplugging the AC adapter. Headset Battery Installation IMPORTANT: Charge the batteries for 16 hours prior to first use. You must only use rechargeable batteries (included). Do NOT use alkaline batteries or you will severely damage the unit.
5. Adjust the volume to a comfortable listening level using the volume control dial. If the headset is out of the range of the transmitter or the infrared sensors in the headset are being blocked, no sound will come through the headset. Fig. 7 6. We recommend turning the transmitter and headset off after each use except when charging the headset when the headset should be off and the transmitter should be on.
Tips for Using Your TV Listener J3 Troubleshooting • If you are using your TV Listener J3 with an LCD or plasma television and are experiencing static, connect the transmitter to your cable box instead of your television. Follow the instructions for Stereo Installation on Pg. 6. Also, move the transmitter so that it is not directly in front of your television. Move the transmitter as far from the television as possible while making sure it is still in the line of sight of the headset.
Sound from headset is low or poor. There is static coming from headset. There is a radio signal coming from headset. There is sound coming from only one side of the headset. {14} Volume on headset is too low. Increase volume level. Headset and transmitter are too far apart. Bring them closer together. Maximum range is 33 feet (10 meters). Headset is not in line of sight of transmitter. Make sure nothing is obstructing the transmission of the infrared light rays from transmitter to headset.
