User Manual

Ford Historic Diagnostics • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5
Fast or Slow Codes
Select Fast Codes or Slow Codes and
press
(17(5 .
Follow the instructions step-by-step.
Failure to perform these steps may set a
false DTC in the PCM — observe the
display.
1) Set Parking Brake.
2) Transmission In Park Or Neutral.
3) Turn A/C Off.
4) Start Engine — Let Idle Until Hot.
5) Turn Ign Key Off.
6) Wait 10 Seconds. Start Engine — Let Idle.
7) If Vehicle Has A Manual Transmission, Release Clutch.
Press
(17(5 to activate the self-test.
✓ The following actions do not apply to MECS vehicles.
❒ For a 7.3L Diesel, depress the throttle until test is done.
❒ If Applicable, set Octane Switch To Premium.
The tool will prompt the user to:
❒ Work Steering Wheel
❒ Pump Brake Pedal & Cycle OD (overdrive) Cancel Switch ONLY IF
PUSH BUTTON IS AVAILABLE.
✓ Observe Screen for Prompt to Perform the next action.
❒ Quickly Press And Release Throttle. One Time Only!
After performing these steps, wait for the
tool to retrieve DTCs. When the test is
done, turn Ign Key OFF and press
(17(5 .
Use the
DOWN arrow key to begin viewing
codes.
'7>75FA67(KB7
[ S3EFA67E
S'>AIA67E
(7EFA?B>7F76
(GD@9@7K#88X
$D7EE"(&(AA@F
)E7 S FAH;7IA67EX
+D;F7AI@A67E
AD&787D7@57X
]
 