User Manual

Help & Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7
• Memory Test
If the tool has trouble playing back recorded data, displaying trouble code
definitions, or doing any other function that uses internal memory, then it is a good
idea to run the Memory Test.
From the Tool Self-Test menu, select Memory Test and press
(17(5 .
A MEMORY TEST message displays and
the screen fills with dots as the internal
memory is tested.
✓ The Memory Test may take several
minutes to complete.
If no problems were detected, then a
MEMORY TEST PASSED! message
displays on the screen. If a problem was
detected, then a MEMORY TEST FAILED!
message and the software identification
(SW ID) display on the screen.
Press the
(17(5 key to return to the Tool Self-Test menu.
• Program Mode
The Program Mode is accessed from the Main Menu. This mode is used for
updating the tool software. Instructions are provided with the new software.
TECHNICAL SUPPORT
• Toll-Free Number: 1-800-228-7667
• e-mail: [e-mail]
• visit website: www.actron.com
!7?ADK (7EF X X X X X X
XXXXXXXXXX
!7?ADK (7EF 3;>76
'+
$D7EE "(& (A A@F