Operating Instructions

11
On Non-CAN vehicles the Tool displays:
 test data (test ID)
 maximum value (MAX)
 test measurements (MEAS)
 minimum value (MIN)
 status (STS)
 measurementsandspecicationvaluesarehexadecimal
numbers(i.e.,$1A,$FE,$11.)
 module (MOD)
OR
On CAN vehicles the Tool displays:
 Testperformed.Thetestperformedcanbe$##iftestisnot
dened.Refertovehicleservicemanualfordetails.
 Measured values and units of measure (such as volts, amps,
seconds).
 Status of monitor test data.
 Module ID where the monitor test data came from.
On-Board Systems
The On-Board Systems test allows the Tool to control operation of
vehicle components, tests, or systems.
9 Some manufacturers do not allow tools to control vehicle
systems. A vehicle not supporting an on-board system is
identiedbyamessagedisplayedwhenselected.
9 Refer to the appropriate vehicle service manual for on-board
systems instructions.
9 After selecting On-Board Systems, a list of on-board
systems and components available for testing are shown on
the display.
Acronyms
The Acronyms function allows the user to view acronyms and abbrevia-
tions used by the Scan Tool.
9 Acronyms function is accessed from the Diagnostic Menu