Operating Instructions

5
• Do not use the Tool if internal circuitry has been exposed to
moisture.Internalshortscouldcauseareanddamagethe
VehicleorTool.
• Always turn the ignition key OFF when connecting or
disconnecting electrical components, unless otherwise
instructed.
• Most vehicles are equipped with air bags. If you elect to work
around air bag components or wiring, follow your vehicle
service manual cautions. You could be seriously injured or
killed by an unintended deployment.
The air bag can still open several minutes after
ignition is turned off.
• Always follow vehicle manufacturer’s warnings, cautions, and
service procedures.
About the Tool
The Tool allows you to retrieve and erase/reset diagnostic data from
the vehicle control module. The diagnostic data can be used to help
determine the cause of a vehicle malfunction.
Use the Tool to perform the following functions:
Codes/Data Erase/Reset Retrieve
Confirmed Codes Erase

Pending Codes Erase

Permanent Codes --

ViewData --

MIL Status --

I/M Monitors Reset

Freeze Data Erase

VehicleInformation --

State OBD Check Erase

Drive Cycle Monitor Reset

O2 Monitor Test Erase

Diagnostic Monitor Test Erase

On-Board Systems --

WARNING