Instruction Manual

Using The Scan Tool
3 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
Quick Test
✓ Quick Test is a feature of the tool that occurs the first time the tool
establishes communication with the vehicle after vehicle selection.
Quick Test will display the results of I/M Monitors and Read Codes.
Quick Test is enabled by default.
From System Setup menu:
1.Select Quick Test.
•Use
UP or DOWN
arrow key until Quick Test is
highlighted.
•Press
ENTER.
2.Select desired Quick Test
choice.
•Use
UP or DOWN
arrow key until desired choice
is highlighted.
3.Save Quick Test setting.
• Press
ENTER.
=====================
English/Metric
Adjust Contrast
Auto-Power Off
Quick Test
Print Header 
Language Setup
System Setup
Quick Test
=====================
Disabled
Enabled
Quick Test
Disabled