Instruction Manual

Using The Scan Tool
3 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
Vehicle-Specific Features
Review Data
✓ The Review Data function allows the user to view the information
from the previous vehicle tested.
✓ Scan Tool does not require power from the vehicle to use the
Review Data function.
1. Select Review Data.
•Use
UP or DOWN
arrow key until Review Data is
highlighted.
•Press
ENTER.
2.Follow prompts and instructions provided by Scan Tool and
then select item whose data you wish to review.
✓ The Review Data menu shows a
checkmark next to the item(s) that
has data.
✓ If there isn’t a checkmark next to
the item, then this item can’t be
selected until the appropriate
function is run from the
Diagnostic Menu.
✓ Only 1 function, Recording, needs detailed instructions.
=====================
Vehicle Diagnostics
Review Data
Print Data
System Setup
Main Menu
Review Data




=====================
I/M Monitors
DTCs (Codes)
State OBD Check
Recording
View Fre eze Data 
02 Monitor Tests
Review Data
I/M Monitors