Instruction Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 25
Using The Scan Tool
3
✓ If you select the previous vehicle, the tool will proceed to the
Diagnostic menu.
✓ If you wish to select a vehicle other than the previous vehicle, then
choose between Global OBD II, Domestic Vehicles, European
Vehicles, or Asian Vehicles and continue making selections until the
vehicle selection is complete.
✓ The following screen only displays when power comes from
vehicle.
• Turn vehicle key off for 10
seconds.
•Turn vehicle key back to the on
position.
•Press
ENTER on the Scan
Tool.
✓ If you select a vehicle different than your previous vehicle, all
retrieved vehicle data currently stored in your tool will be erased.
✓ If you select the previous vehicle, all stored vehicle data will be
retained until it is overwritten by the corresponding function
selected from the Diagnostic Menu.
=====================
Please turn the
key off for
10 seconds then
turn the key on.
Press ENTER

to continue.
Turn Key Off