Instruction Manual

Diagnostic Menu
4 – 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
✓ If no DTCs are present a
message stating System Pass:
No Faults Detected is displayed.
✓ If you selected All of the Above
from the Select Module menu,
then all of the codes will be
displayed as if you picked all
menu items individually.
3.View and write down the DTCs.
•Use the
UP or DOWN arrow keys.
❒ The screen at the right shows
where the Read Codes
information is located.
DTC Number - number of the trouble code that you will find in vehicle
service information.
X of Y - Indication that you are viewing code x of y, where x is the code
you are viewing of the total y.
Module - This field is where the name of the module (e.g. ABS) or
address of the module (e.g. Mod $28) or both are shown (ABS $28). The
table below describes modules supported.
=====================
System Pass
No faults detected.
Read Codes
DTC X of Y
Number Module
DTC Descri ption
DTC Type