Instruction Manual

Diagnostic Menu
4 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4
4
1. Select Record Data.
•Use
UP or DOWN
arrow key until Record Data is
highlighted.
•Press
ENTER .
✓ Follow all instructions on display.
✓ The ScanTool can maintain only one recording. Make sure to
thoroughly review old recording before erasing.
✓ If a recording currently exists in
memory, a message prompting to
erase data is displayed.
✓ Scan Tool validates list of global PIDs from vehicle.
2. Refer to View Data to setup Custom List or View Entire List.
3. Press
ENTER to start
recording
.
=====================
Read Codes 
Erase Codes
MIL Status
State OBD Check
View Data 
Record Data
Diagnostic Menu
Record Data
=====================
Previous recording
in memory. Do you
want to erase it and
make a new one?
NO
Record Data
YES
=====================
Ready to record.
Press Enter
to start recording.
Press BACK  To Exit.
Record Data