Operating Instructions

PID Definitions
A – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
A
O2S12_PCT,
O2S22_PCT
02 Sensor Concentration Bank 1 Sensor 2, Bank 2 Sen-
sor 2
OBD2 STAT OBD Status
OUT TEMP Ambient Air Temp
PM 11, PM 21 PM Sensor Mass Concentration Ba
nk 1 Sensor 1, Bank
2 Sensor 1
PNTE_Stat PM NTE control area status
PTO STATUS PTO Status
PTO_STAT Power Take Off (PTO) Status
PTO_TIME Total Run Time With PTO Active
REAG_DEMD Average Demanded Reagent Consumption
REAG_LVL Reagent Tank Level
REAG_RATE Average Reagent Consumption
REL FRP Relative Fuel Rail Pressure
REL TPS Relative Thrott
le Position
RUN_TIME Total Engine Run Time
SCR REAG DEV, DEV1,
DEV2, DEV3,
DEV4
SCR inducement system actual state 10K history DEV1
(0 - 10000 km), 10K history DEV2 (10000 - 20000 km),
10K history DEV3 (20000 - 30000 km), 10K history DEV4
(30000 - 40000 km): deviation of reagent consumption
SCR REAG LOW,
L
OW1, LOW2, LOW3,
LOW4
SCR inducement system actual state 10K history LOW1
(0 - 10000 km), 10K history LOW2 (10000 - 20000 km),
10K history LOW3 (20000 - 30000 km), 10K history
LOW4 (30000 - 40000 km): reagent level too low
SCR REAG WRONG,
W
RONG1, WRONG2,
WRONG3, WRONG4
SCR inducement system actual state 10K history
WRONG1 (0 - 10000 km), 10K history WRONG2 (10000
- 20000 km), 10K history WRONG3 (20000 - 30000 km),
10K history WRONG4 (30000 - 40000 km): incorrect rea
-
gent
SCR SYS ACTIVE SCR inducement system actual state: inducement sys-
tem active
SCR_DIST_1D Distance travelled in current
10K block (0 - 10000 km)
SCR_DIST_1N, 2N, 3N,
4N
Distance travelled while inducement system active in
cu
rrent 10K block 1N (0 - 10000 km), 20K block 2N (10 -
20000 km), 30K block 3N (20 - 30000 km), 40K block 4N
(30 - 40000 km)