Operating Instructions

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 9
Using The Scan Tool
3
Quick Test
✓ Quick Test is a feature of the tool that occurs the first time the tool
establishes communication with the vehicle after vehicle selection.
Quick Test will display the results of I/M Monitors and Read Codes.
Quick Test is enabled by default.
From System Setup m
enu:
1.Select Q
uick Test.
•Use
UP or DOWN
arrow key until Quick
Test is
highlighted.
•Press
ENTER.
2.Select desired Quick T
est
choice.
•Use
UP or DOWN
arrow key until desired choice
is hi
ghlighted.
3.Save Quick Test setting.
• Press
ENTER.
Print Header
✓ Print Header selection allows the user to turn off the Scan Tool
printing the currently-selected vehicle prior to the retrieved vehicle
data when selecting items from the Print Data menu.
✓ For example, if your currently-selected vehicle is a 2008 Chevrolet
Corvette W = 6.2L, this information would print at the top of the
page for the data you are printing.
=====================
English/Metric
Adjust Contrast
Auto-Power Off
Quick Test
Print Header 
Language Setup
System Setup
Quick Test
=====================
OFF
Quick Test
ON