Operating Instructions

Using The Scan Tool
3 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
Display Test
The Display Test is used to check the display.
✓ The test fills every pixel of the display with a solid black character.
From System Setup m
enu:
1.Select Dis
play Test.
•Use
UP or DOWN
arrow key until Displa
y Test is
highlighted.
2. Start Dis
play Test.
•Press
ENTER.
3.Look for Missing Spots.
• All characters display in solid black if there are no concerns.
• Screen flips back and forth between screens shown below.
4. When Done, Press
BACK Key.
=====================
Language Setup 
Long PID Names
Tool Information
Display Test
Keypad Test 
Memory Test
System Setup
Display Test
Check for missing
spots in display
Press BACK
 To exit
=====================
Display Test