Operating Instructions

Using The Scan Tool
3 – 16 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
From System Setup menu:
1.Select Memory Test.
•Use
UP or DOWN
arrow key until Memory T
est is
highlighted.
•Press
ENTER.
✓ Memory Test may take
several minutes to complete.
✓ Memory Test results display.
❒ If no problems were
detected, then PASSED
is displayed
❒ If RAM fails, an error
message is shown.
❒ If FLASH fails, a check-
sum is shown.
2. Return to Sy
stem Setup menu.
•Press BACK.
=====================
Language Setup 
Long PID Names
Tool Information
Display Test
Keypad Test 
Memory Test
System Setup
Memory Test
=====================
INT RAM Passed
INT FLASH Passed
Memory Test
Press BACK
 to exit