Operating Instructions

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 21
Using The Scan Tool
3
1.Select Print Data.
•Use
UP or DOWN
arrow key until Pr
int Data is
highlighted.
•Press
ENTER.
✓ On the Print Data menu, Print All prints all data collected by the Scan
Too l.
✓ When printing a Recording, Start Frame and End Frame must be
defined.
2.Select Data To Be Printed.
•Use
UP or DOWN
arrow key.
•Press
ENTER.
✓ The Print Data menu shows a
check mark next to the items that
have data.
✓ If there is no checkmark next to the item, then this item cannot be
selected until the appropriate function is run from the Diagnostic
Menu.
3.Return to Select Print Data scr
een.
•Press
BACK.
=====================
Component Locator
Acronyms
Review Data
Main Menu
Code Lookup
System Setup

Print Data
=====================
Print All
I/M Monitors
DTCs (Codes)
State OBD Check
Recording 
View Fre eze Data
Print Data
Print All

