Operating Instructions

Using The Scan Tool
3 – 26 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
✓ The following screen only displays when power comes from
vehicle.
• Turn vehicle key off for 10
seconds.
•Turn vehicle key back to the on
position.
•Press
ENTER on the Scan
Tool.
• If vehicle power is not
detected, a screen is shown to
v
erify tool connection.
✓ If you select a vehicle different than your previous vehicle, all
retrieved vehicle data currently stored in your tool will be erased.
✓ If you select the previous vehicle, all stored vehicle data will be
retained until it is overwritten by the corresponding function
selected from the Diagnostic Menu.
to continue.
=====================
Please turn the key
off for 10 seconds
then turn the key on.
Press ENTER

Turn Key Off
=====================
Please verify the tool
is connected to the
vehicle with the
ignition key turned on.
Press ENTER to cont

Vehicle Required