Operating Instructions
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 7
Diagnostic Menu
4
Read Codes
✓ The Read Codes function allows the Scan Tool to read the DTCs from
the vehicle’s control modules. DTCs are used to help determine the
cause of a problem or problems with a vehicle. These codes cause the
control module to illuminate the malfunction indicator lamp (MIL)
when emission-related or driveability fault occurs. MIL is also known
as service engine soon or check engine lamp.
✓ Read Codes can be done with the key on engine off (KOEO) or with
the key on engine running (KOER).
From Diagnost
ic Menu:
1.
=====================
I/M Monitors
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Diagnostic Menu
Read Codes
Select
Read Codes.
•Use
UP
or
DOWN
arrow key until Read Code
s is
highlighted.
•Press
ENTER
.
2.
=====================
Global OBD II
ABS
Transmission
Engine
Select Module
OBD II/EOBD
If more than one module is
supported, a menu is
displaye
d.
•Use
UP
or
DOWN
arrow key until desired choice
is highlig
hted.
•Press
ENTER
.