Operating Instructions

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Safety – iii
Safety Precautions
!
Important Safety Messages
Risk of electric shock.
• Do not exceed voltage limits between inputs
indica
ted in the Specifications.
• Use extreme caution when working with circuits that
ha
ve voltage greater than 60 volts DC or 24 volts
AC.
Electric shock can cause injury.
Risk of explosion.
• Safety goggles and protective clothing must be
worn by t
he operator and any bystanders.
- Even if everyday glasses have impact resistant
l
enses, they are NOT safety glasses, and may not
provide adequate protection.
• Do not use this scan tool in environments where
e
xplosive vapors may collect. These areas include:
- below-ground pits.
- confined areas.
- areas that are less than 18 inches above floor.
• Use this Scan Tool in locations with mechanical
v
entilation providing at least 4 air changes per hour.
• Flammable fuel and vapors can ignite.
• Do not smoke, strike a match, or cause a spark in
t
he vicinity of the battery. Battery gases can ignite.
• Avoid making an accidental connection between the
ba
ttery terminals. Do not place uninsulated metal
tools on the battery.
• When removing battery cables, remove the ground
c
able first.
!
WARNING