User Manual

en
|
10
|
User guide
| CP9670
AutoScanner®
573904 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
4 Using the Scan Tool
4.1 The Scan Tool
1
3
5
2
4
1. LCD display (color, backlit, QVGA resolution)
2. key performs the Read Codes function and
scrolls back through the screens. Press this key
when an up arrow ( ) appears on the display to
scroll backwards, or press and hold for 2 seconds
when appears on the display to read codes.
3. key performs the Erase Codes function and
scrolls forward through the screens. Press this key
when a down arrow ( ) appears on the display to
scroll forward, or press and hold for 2 seconds
when appears on the display to erase codes.
4. key returns to previous screen.
5. key selects item.
6. USB port provides USB connection for the computer.
7. DLC cable provides connection for vehicle interface.
8. Serial number plate (on back; not shown).
4.2 Specifications
Display Color, backlit, QVGA resolution
Operating Temperature
0 to 50°C (32 to 122°F)
Storage Temperature -20 to 70°C (-4 to 158°F)
External Power
7 to 16 Volts
A minimum of 8.0 V is required for most control modules
to operate properly in a vehicle.
Dimensions
Height Width Depth
5.6 inches 3.5 inches 0.9 inches
142 mm 89 mm 23 mm
4.3 Display
The display has a large viewing area for displaying mes-
sages, instructions, and diagnostic information.
The back-lit liquid crystal display (LCD) is a QVGA pixel
display. Characters used to help operate the scan tool
are:
• Indicates additional information is available by
scrolling down.
• Indicates additional information is available by
scrolling up.
• Indicates the and hot keys are
active.
• Indicates data is available for items on the
Review Data Menu.
• Indicates graphical viewing of data items is
available in View Data.
Keypad
The keypad is used to move through the different menus
of the scan tool. The scan tool’s software is designed for
ease in operating and navigating through menus.
CAUTION
Do not use solvents such as alcohol to clean
keypad or display. Use a mild nonabrasive
detergent and a soft, cotton cloth.
CAUTION
Do not soak keypad as water might find its
way inside the scan tool.