User Manual

573904 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
CP9670 AutoScanner®
|
User guide | 11
|
en
4.4 Power
Vehicle Power
When the scan tool is connected to the vehicle’s DLC,
the tool is powered by the vehicle and will automatically
turn on once connected.
USB Power
When the tool is connected to a PC via the USB cable
(not provided), the tool will automatically power up. Refer
to “6.2 Scan Tool Does Not Power Up” on page 33 if
there are problems.
4.5 System Setup
System Setup allows:
• Measurement units to be changed.
• Scan tool information to be viewed.
• Display to be checked.
• Operation of the keypad to be checked.
• Memory of the tool to be checked.
• Scan tool to be upgraded.
• Language to be changed.
• Long PID names to be turned ON or OFF.
From the Diagnostic Menu:
1. Select System Setup.
• Use the key until System Setup is high-
lighted.
• Press .
Diagnostic Menu
Diagnostic Monitor Tests
On-Board Systems
Charging System Monitor
Vehicle Information
Component Locator
Acronyms
Review Data
Code Lookup
System Setup
Rd\Er
Changing Measurement Units
English is the default measurement unit. Measurement
units can be changed in View and Record Data.
From System Setup screen:
1. Select English/Metric.
• Use the and keys until English/Metric
is highlighted.
• Press .
System Setup
Language Setup
Long PID Names
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
English/Metric
2. Select desired measurement unit.
• Use the and keys until the desired unit
is highlighted.
• Press .
Measurement Units
English
Metric
3. Save measurement setting.
• Press .
Language Setup
Language Setup selection allows the user to change the
language used by the Tool. English is the default lan-
guage.
From System Setup screen:
1. Select Language Setup.
• Use the and keys until Language Setup
is highlighted.
• Press .
System Setup
Language Setup
Long PID Names
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
English/Metric