User Manual

573904 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
CP9670 AutoScanner®
|
User guide | 17
|
en
Select Vehicle
AutoID (>=2000)
Manual (<=1999)
Prev: 06 Lancer
2000-04 vehicles may support Aut
• A Turn Key Off screen will display.
Turn Key Off
Please turn the key off for
10 seconds then turn the key
on.
Press ENTER to continue
2. After 10 seconds, turn key ON.
• If the vehicle is supported, the VIN number and
essential vehicle data will display.
Select Vehicle
Pre: 06 Lancer
Is this correct?
No Yes
3. Use the or key to select YES or NO.
• If YES is selected, the Tool may display more
selections to further select the vehicle because
not every aspect of vehicle identification is
contained in the VIN.
• If NO is selected, the Tool proceeds to manual
selection.
• Press .
4. If Manual was selected in Step 1, use the and
keys to select:
• OBDII/EOBD
• US
• Europe
• Asia
• Prev:
• Press .
Vehicle?
US
Europe
Asia
Prev: 06 Lancer
OBDII/EOBD
The OBDII/EOBD selection is provided for vehicles that
are not listed, however, selection of the specific vehicle
is recommended for maximum tool utility.
The previously selected vehicle will appear as the Prev:
menu selection after Asia.
• To select a vehicle other than the previous
vehicle, choose between OBDII/EOBD, US,
Europe, or Asia, and continue making selections
until the vehicle selection is complete.
The following screen only displays when power comes
from vehicle.
• Turn vehicle key OFF for 10 seconds.
• Turn vehicle key back to the ON position.
• Press .
Turn Key Off
Please turn the key off for
10 seconds then turn the key
on.
Press ENTER to continue
If vehicle power is not detected, a screen is shown to
verify tool connection.
If a vehicle other than the previous vehicle is selected,
the tool will automatically overwrite the previous vehicle
with the currently selected one. All previous scanned
data in Review Data will be a combination of all previ-
ous vehicles. Run all functions again to ensure that all
data was scanned from the current vehicle.
If the previous vehicle is selected, all stored vehicle data
will be retained until it is overwritten by the correspond-
ing function selected from the Diagnostic Menu.
4.11 Acronyms
The Acronyms function allows the user to view acro-
nyms and abbreviations used by the scan tool.
From the Diagnostic Menu.
1. Select Acronyms.
• Use the and keys until Acronyms is