User Manual

573904 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
CP9670 AutoScanner®
|
User guide | 25
|
en
ABSLT TPS(%)
CALC LOAD(%)
COOLANT(°C)
ENG SPEED(RPM)
EQ RATIO11
FUEL SYS 1
FUEL SYS 2
IAT(°C)
IGN ADV(°)
0.0
0.0
-40
0
1.999
N/A
N/A
-40
0.0
LT FTRM1(%) 0.0
Throttle Position
• See “Appendix A—PID Definitions” on page 34
for PID definitions.
• If the icon displays while a PID is selected
press to view graph.
• Press to pause the graph. Press again
to continue graphing.
3. Return to PID screen.
• Press .
4. Return to Select Data to View menu.
• Press .
5. Return to Diagnostic Menu.
• Press .
5.7 Record Data
The Record Data function records PIDs while vehicle is
parked or being driven. The Record Data function is
mainly used for diagnosing intermittent driveability
problems that cannot be isolated by any other method.
The recording time varies. A recording consists of frames
of data before the trigger and several frames after the
trigger.
CAUTION
Two people must be in vehicle when driving.
One to drive and the other to operate the
scan tool.
From Diagnostic Menu:
1. Select Record Data.
• Use the and keys until Record Data is
highlighted.
• Press .
Diagnostic Menu
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Record Data
View Freeze Data
Drive Cycle Monitor
Rd\Er
I/M Monitors
2. Follow all instructions on display.
• The scan tool can maintain only one recording.
Make sure to thoroughly review old recording
before erasing.
• If a recording currently exists in memory, a
message prompting to erase data is displayed.
Record Data
Previous recording in
memory.
Do you want to erase it and
make a new one?
No Yes
• Scan tool validates list of global PIDs from
vehicle.
Validating PIDs
Validating PID List
PID 7/329
Please Wait
3. Press to begin recording.
Recording
Collecting pretrigger data
Press ENTER to trigger
recording
• Data continues to be saved until either:
– Record memory is full.