User Manual

en
|
26
|
User guide
| CP9670
AutoScanner®
573904 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
– Operator presses .
Recording
Collecting data for frame #2
Press ENTER to end recording
• Scan tool recording times vary. A recording
consists of frames of data before trigger and
several frames after trigger.
4. After recording, scan tool displays a prompt to
Playback Data.
Record Data
Playback data?
No Yes
• Select NO to return to Diagnostic Menu.
• Select YES to display recorded data.
• Refer to “Recording” on page 15 for instruc-
tions on how to play back data.
5.8 View Freeze Data
When an emission-related fault occurs, certain vehicle
conditions are recorded by the on-board computer. This
information is referred to as freeze frame data. View
Freeze Data is a snapshot of the operating conditions at
the time of an emission-related fault. View Freeze Data
can be overwritten by faults with a higher priority. If
codes were erased, View Freeze Data may not be stored
in vehicle memory depending on vehicle.
From Diagnostic Menu:
1. Select View Freeze Data.
• Use the and keys until View Freeze
Data is highlighted.
• Press .
Diagnostic Menu
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Record Data
View Freeze Data
Drive Cycle Monitor
Rd\Er
I/M Monitors
2. Select frame, if more than one frame is present.
• Use the and keys until the desired
frame is highlighted.
• Press .
Select Data to View
Long PID Names
English/Metric
P2122 (MOD $09)
Rd\Er
3. View PID on scan tool.
Trouble Code that caused Freeze
TROUB CODE
FUEL SYS 1
FUEL SYS 2
CALC LOAD(%)
COOLANT(°C)
ST FTRM1(%)
LT FTRM1(%)
MAP(KPa)
ENG SPEED(RPM)
P2122
N/A
N/A
0.0
-40
0.0
0.0
177.0
0
VEH SPEED(KPH) 0
• Use the and keys.
• See “Appendix A—PID Definitions” on page 34
for PID definitions.
• If Long PID Names is turned on, the expanded text
for the PID will scroll on the bottom line of the
display. See “Long PID Names” on page 12.
4. Select another frame to view (if available).
• Press .