User Manual
Table Of Contents
- 1 Safety Precautions
- 1.1 Read All Instructions
- 2 Important Safety Warnings and Instructions
- 3 Getting Started
- 4 Using the Scan Tool
- 5 Diagnostic Menu
- 6 Troubleshooting
- 7 Appendix A—PID Definitions
- 8 Appendix B—Glossary
- 9 Limited Warranty
573904 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
CP9670 AutoScanner®
|
User guide | 7
|
en
WARNING
Engine compartment contains electrical
connections and hot or moving parts.
• Keep yourself, test leads, clothing and
other objects clear of electrical connec-
tions and hot or moving engine parts.
• Do not wear watches, rings, or loose
fitting clothing when working in an
engine compartment.
• Do not place tools or test equipment
on fenders or other places in engine
compartment.
• Barriers are recommended to help
identify danger zones in test area.
• Prevent personnel from walking
through test area.
Contacting electrical connections and hot
or moving parts can cause injury.
WARNING
Risk of injury.
• The scan tool should be operated by
qualified personnel only.
• Use the scan tool only as described in
the user’s manual.
• Use only manufacturer’s recom-
mended attachments.
• Do not operate the scan tool with
damaged cables.
• Do not operate the scan tool if it has
been dropped or damaged, until exam-
ined by a qualified service representative.
Operation of the scan tool by anyone other
than qualified personnel may result in injury.
P R N D L 2
WARNING
Risk of unexpected vehicle movement.
• Block drive wheels before performing
a test with engine running.
• Unless instructed otherwise:
– set parking brake
– put gear selector in neutral for
manual transmissions
– put gear selector in park for
automatic transmissions
– disconnect release mechanism on
the automatic parking brake
release for testing and reconnect
when testing is completed.
• Do not leave a running engine unattended.
A moving vehicle can cause injury.
CAUTION
Risk of equipment or circuit damage.
• Unless specifically directed by manufac-
turer, make sure ignition is off before
connecting or disconnecting connectors
or any vehicle electrical terminals.
• Do not create a short between battery
terminals with a jumper wire or tools.
Improper equipment use can cause equip-
ment or circuit damage.
CAUTION
Misdiagnosis may lead to incorrect or
improper repair and/or adjustment.
• Do not rely on erratic, questionable,
or obviously erroneous test informa-
tion or results.
– If test information or results are
erratic, questionable, or obviously
erroneous, make sure all connec-
tions and data entry information
are correct and test procedures
were performed correctly.
– If test information or results are
still suspicious, do not use them
for diagnosis.
Improper repair and/or adjustment may
cause vehicle or equipment damage or
unsafe operation.
DANGER
Some vehicles are equipped with air bags.
• Follow service manual warnings when
working around air bag components
or wiring.
– If service manual instructions are
not followed, an air bag may deploy
unexpectedly, resulting in injury.
– Note an air bag can still deploy
several minutes after ignition key
is off (or even if vehicle battery is
disconnected) because of a
special energy reserve module.
An air bag opening can cause injury.