User Guide

en
|
16
|
User guide
| CP9680
AutoScanner® Plus
573102 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
System Setup
Quick Test
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
Keypad Test
Memory Test
2. Press a key.
• Key name or scroll direction should inverse
colors on display.
• will return the tool to the System Setup
screen.
Keypad Test
Press BACK to exit
BACK
ENTER
CODE
Memory Test
The Memory Test will test RAM and flash ROM. Run the
Memory Test if the tool has trouble:
• Playing back recorded data.
• Displaying trouble code definitions.
From System Setup screen:
1. Select Memory Test.
• Use the UP and DOWN keys until Memory
Test is highlighted.
• Press .
System Setup
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
• Memory Test may take several minutes to com-
plete.
• Memory Test results display:
– If no problems were detected, then
“Passed” is displayed.
– If RAM fails, an error message is shown.
– If FLASH fails, a checksum is shown.
Memory Test
INT RAM
INT FLASH
Passed
10ca
Press BACK to exit
2. Return to System Setup menu.
• Press .
Program Mode
The Program Mode is used for updating the scan tool.
Instructions are provided with upgrades. Refer to “3.2
Download Scanning Suite” on page 8.
System Setup
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
PROGRAM MODE
See User Manual
Connect Tool to PC
with USB Cable
• If the Program Mode is entered, is not opera-
tional. The tool must be powered off to exit Pro-
gram Mode and then restarted to continue.
4.6 Vehicle-Specific Features
Review Data
The Review Data function allows the user to view the
information from the previous vehicle tested. The scan